English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
ESD والمنتجات المضادة للساكنة
ESD
The ESD Hand Protection System combines seamless conductive-fiber gloves, grip-coated fingertips and adjustable wrist grounding components for sensitive handling tasks.
- Conductive knit controls charge while preserving dexterity.
- Coated fingertips improve grip on small components.
- Wrist connection integrates hand protection with the ground path.
مقدمة المنتج
Fine-gauge nylon or polyester yarn is blended with conductive filament to distribute charge across each glove. Polyurethane fingertip coating improves controlled pickup without covering the breathable back. Adjustable bands and coiled leads provide the operator grounding interface where the site procedure requires a direct corded path.
الخصائص الرئيسية
Conductive filament runs through the glove structure.
Thin polyurethane fingertips preserve tactile response.
Elastic cuffs maintain a close, stable fit.
Detachable wrist bands and cords are individually replaceable.
Light gray fabric makes visible contamination easier to identify.
مخاوف المنتج للعملاء
Hand protection must balance electrostatic behavior, skin contact, grip, cleanliness and the tactile control required for small parts.
Ordinary gloves can generate charge during movement.Conductive filament dissipates charge through the glove structure.
Smooth knit slips on miniature components.Thin polyurethane coating adds grip at the working fingertips.
Heavy coatings reduce touch sensitivity.Fingertip-only coverage leaves most of the glove flexible and breathable.
A loose cuff interrupts consistent contact.Elastic cuffs and adjustable wrist bands maintain close fit.
Worn or contaminated gloves are reused without verification.Replaceable pairs and periodic resistance checks support controlled maintenance.
تطبيقات نموذجية
Printed circuit board assembly.Semiconductor component inspection.Precision optics and sensor handling.Electronics repair and rework.Static-sensitive packing operations.
المعلمات الفنية
These values represent common fine-gauge conductive handling gloves and companion grounding hardware; size, coating area and connector style are configurable.
| المواد الأساسية | Conductive nylon/polyester knit with carbon-suffused filament |
|---|---|
| سمك اللوحة | 0.5–1.0 mm knitted glove thickness |
| العرض الفعال | 85–115 mm palm width by size |
| الحد الأقصى الطول | Up to 260 mm glove length |
| الصلب يواجه سمك | 0.5 mm nominal stainless snap shell thickness |
| الكثافة الأساسية | 180–260 kg/m³ equivalent knitted bulk density |
| الموصلية الحرارية | 0.04–0.07 W/(m·K) |
| إنهاء السطح | Gray seamless knit with black polyurethane fingertip coating |
| نوع المشترك | Elastic cuff with adjustable snap wrist band and detachable coiled cord |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Fingertip, palm or uncoated configurations.Multiple glove sizes and cuff colors.Carbon, copper or silver conductive yarn blends.Single-wire wrist strap and cord sets.Alternative snap and plug formats.Clean-packed versions for controlled environments.
Planning a ESD Hand Protection System specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
