Complete ESD hand protection kit with conductive gloves wrist bands and cords

ESD および帯電防止製品

ESD 手保護システム

The ESD Hand Protection System combines seamless conductive-fiber gloves, grip-coated fingertips and adjustable wrist grounding components for sensitive handling tasks.

Conductive knit controls charge while preserving dexterity.
Coated fingertips improve grip on small components.
Wrist connection integrates hand protection with the ground path.

見積もりリクエスト製品案内

商品紹介

Fine-gauge nylon or polyester yarn is blended with conductive filament to distribute charge across each glove. Polyurethane fingertip coating improves controlled pickup without covering the breathable back. Adjustable bands and coiled leads provide the operator grounding interface where the site procedure requires a direct corded path.

主要な特徴

Seamless knit limits pressure points during precision work.

Conductive filament runs through the glove structure.

Thin polyurethane fingertips preserve tactile response.

Elastic cuffs maintain a close, stable fit.

Detachable wrist bands and cords are individually replaceable.

Light gray fabric makes visible contamination easier to identify.

お客様の製品に関する懸念事項

Hand protection must balance electrostatic behavior, skin contact, grip, cleanliness and the tactile control required for small parts.

Ordinary gloves can generate charge during movement.Conductive filament dissipates charge through the glove structure.

Smooth knit slips on miniature components.Thin polyurethane coating adds grip at the working fingertips.

Heavy coatings reduce touch sensitivity.Fingertip-only coverage leaves most of the glove flexible and breathable.

A loose cuff interrupts consistent contact.Elastic cuffs and adjustable wrist bands maintain close fit.

Worn or contaminated gloves are reused without verification.Replaceable pairs and periodic resistance checks support controlled maintenance.

典型的な用途

Printed circuit board assembly.Semiconductor component inspection.Precision optics and sensor handling.Electronics repair and rework.Static-sensitive packing operations.

技術的なパラメータ

These values represent common fine-gauge conductive handling gloves and companion grounding hardware; size, coating area and connector style are configurable.

コア材料	Conductive nylon/polyester knit with carbon-suffused filament
パネルの厚さ	0.5–1.0 mm knitted glove thickness
有効幅	85–115 mm palm width by size
最大長さ	Up to 260 mm glove length
鋼鉄の厚さを直面する	0.5 mm nominal stainless snap shell thickness
コア密度	180–260 kg/m³ equivalent knitted bulk density
熱伝導率	0.04–0.07 W/(m·K)
表面仕上げ	Gray seamless knit with black polyurethane fingertip coating
ジョイントタイプ	Elastic cuff with adjustable snap wrist band and detachable coiled cord
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Fingertip, palm or uncoated configurations.Multiple glove sizes and cuff colors.Carbon, copper or silver conductive yarn blends.Single-wire wrist strap and cord sets.Alternative snap and plug formats.Clean-packed versions for controlled environments.

Planning a ESD Hand Protection System specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する