English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة الجدار والسقف للغرفة النظيفة
لوحة الجدار غرف الأبحاث القابلة للإزالة
A removable steel-faced wall module hooked onto an internal stud frame, allowing either room face to be opened for utility work, equipment routes or future layout changes.
- Remove from Either Wall Face
- Accessible Internal Service Void
- 6 m Panel-Run Height
- Replaceable Hook-On Modules
مقدمة المنتج
Demountable Cleanroom Wall Panels use thin composite leaves on both sides of a galvanized stud-and-noggin frame. Each 15 mm leaf hooks onto the structure rather than being permanently bonded into a monolithic wall. The 100 mm complete wall depth provides a protected pathway for electrical and mechanical services, and the recessed floor track lets resilient or resin flooring finish flush to the base. A panel can be removed from one side or mid-run, giving maintenance teams access without dismantling the opposite room face.
الخصائص الرئيسية
Internal studs carry wall loads while removable facings remain light enough for controlled handling.
Aluminum honeycomb backing keeps each hook-on module flat without loose-fibre insulation.
Recessed base construction permits a continuous hygienic floor transition.
Individual modules can be exchanged when the layout or surface finish changes.
مخاوف المنتج للعملاء
Demountable-wall buyers are concerned with service access, panel flatness, repeatable sealing and avoiding damage during future equipment changes.
Concealed pipes and cables in a sealed wall are expensive to reach after commissioning.Hook-on leaves detach individually and expose the framed service void without cutting the wall.
A large process machine may not fit through the personnel or material door.A designated removable wall section creates a temporary full-height equipment route.
Repeated removal can deform weak decorative sheets and disturb adjoining modules.Honeycomb-backed leaves and positive support hooks retain panel stiffness through planned access cycles.
Reassembled joints may leak if seals cannot be renewed cleanly.Defined vertical gaps and replaceable cleanroom sealant restore the room-side closure after refitting.
تطبيقات نموذجية
Pharmaceutical rooms with dense utilitiesSemiconductor process wallsReconfigurable medical-device production partitionsEquipment replacement access routesCleanrooms expected to undergo phased expansion
المعلمات الفنية
Typical dimensions for a double-sided demountable cleanroom service wall are listed below.
| المواد الأساسية | Aluminum honeycomb backing on removable room-side panel leaves |
|---|---|
| سمك اللوحة | 15 mm removable leaf; 100 mm complete wall depth |
| العرض الفعال | 1000 mm standard wall module |
| الحد الأقصى الطول | 6000 mm maximum wall height |
| الصلب يواجه سمك | 0.60 mm coated steel sheet |
| الكثافة الأساسية | 20–30 kg/m³ aluminum honeycomb |
| الموصلية الحرارية | N/A — demountable service wall is not intended as a thermal-insulation assembly |
| إنهاء السطح | PET or uPVC-coated steel, powder-coated metal, or satin stainless steel |
| نوع المشترك | Demountable hook-on panel connection over galvanized studs with sealed vertical gap |
| التخصيص | متاح بناءً على التطبيق المقصود وبيئة التشغيل |
الخيارات المتاحة
One-side or two-side panel removalPlasterboard-backed leaf304 or 316L stainless steel faceOversized equipment-access section
Planning a Demountable Cleanroom Wall Panel specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
