Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Sistemas de pared y techo de sala limpia
Panel de pared de sala limpia desmontable
A removable steel-faced wall module hooked onto an internal stud frame, allowing either room face to be opened for utility work, equipment routes or future layout changes.
- Remove from Either Wall Face
- Accessible Internal Service Void
- 6 m Panel-Run Height
- Replaceable Hook-On Modules
Introducción del producto
Demountable Cleanroom Wall Panels use thin composite leaves on both sides of a galvanized stud-and-noggin frame. Each 15 mm leaf hooks onto the structure rather than being permanently bonded into a monolithic wall. The 100 mm complete wall depth provides a protected pathway for electrical and mechanical services, and the recessed floor track lets resilient or resin flooring finish flush to the base. A panel can be removed from one side or mid-run, giving maintenance teams access without dismantling the opposite room face.
Características clave
Internal studs carry wall loads while removable facings remain light enough for controlled handling.
Aluminum honeycomb backing keeps each hook-on module flat without loose-fibre insulation.
Recessed base construction permits a continuous hygienic floor transition.
Individual modules can be exchanged when the layout or surface finish changes.
Preocupaciones del producto del cliente
Demountable-wall buyers are concerned with service access, panel flatness, repeatable sealing and avoiding damage during future equipment changes.
Concealed pipes and cables in a sealed wall are expensive to reach after commissioning.Hook-on leaves detach individually and expose the framed service void without cutting the wall.
A large process machine may not fit through the personnel or material door.A designated removable wall section creates a temporary full-height equipment route.
Repeated removal can deform weak decorative sheets and disturb adjoining modules.Honeycomb-backed leaves and positive support hooks retain panel stiffness through planned access cycles.
Reassembled joints may leak if seals cannot be renewed cleanly.Defined vertical gaps and replaceable cleanroom sealant restore the room-side closure after refitting.
Aplicaciones típicas
Pharmaceutical rooms with dense utilitiesSemiconductor process wallsReconfigurable medical-device production partitionsEquipment replacement access routesCleanrooms expected to undergo phased expansion
Parámetros técnicos
Typical dimensions for a double-sided demountable cleanroom service wall are listed below.
| Materiales Core | Aluminum honeycomb backing on removable room-side panel leaves |
|---|---|
| Panel de espesor | 15 mm removable leaf; 100 mm complete wall depth |
| Ancho efectivo | 1000 mm standard wall module |
| Longitud máxima | 6000 mm maximum wall height |
| Acero frente a espesor | 0.60 mm coated steel sheet |
| Densidad Core | 20–30 kg/m³ aluminum honeycomb |
| Conductividad térmica | N/A — demountable service wall is not intended as a thermal-insulation assembly |
| Superficie acabada | PET or uPVC-coated steel, powder-coated metal, or satin stainless steel |
| Tipo conjunto | Demountable hook-on panel connection over galvanized studs with sealed vertical gap |
| Customization | Disponible según la aplicación prevista y el entorno operativo |
Opciones disponibles
One-side or two-side panel removalPlasterboard-backed leaf304 or 316L stainless steel faceOversized equipment-access section
Planning a Demountable Cleanroom Wall Panel specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
