English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
ملابس الغرف النظيفة، PPE والمواد الاستهلاكية
حقيبة فراغ غرفة نظيفة
Transparent nylon/PE cleanroom vacuum bag with high-barrier laminated film and a heat-sealable inner layer for protected component storage.
- Clear nylon/PE laminate retains vacuum better than monolayer PE
- Puncture-resistant outer nylon protects precision components
- Heat-sealable LDPE inner face forms a strong airtight closure
مقدمة المنتج
The Cleanroom Vacuum Bag uses a biaxially oriented nylon barrier layer laminated to a clean polyethylene contact and seal layer. Compared with monolayer PE, the structure improves puncture resistance and reduces gas transmission, helping a qualified seal retain vacuum during storage. Its clear film supports visual inspection while controlled manufacture and double packaging aid clean transfer.
الخصائص الرئيسية
Polyethylene inner surface supports dependable heat sealing
Clear laminate allows identification without opening
Low gas transmission supports extended vacuum retention
Optional easy-tear notch permits gloved opening without blades
مخاوف المنتج للعملاء
Vacuum packaging can fail when sharp parts puncture film, seal areas wrinkle or gas permeates a low-barrier monolayer. Cleanliness and package-opening method also matter for sensitive components.
Component corners may puncture the evacuated film.Use a nylon-reinforced gauge and protective corner caps where needed.
Contamination or folds can create heat-seal channels.Keep the seal zone flat, dry and free of product contact.
Incorrect sealer settings may weaken or distort the laminate.Qualify sealing temperature, pressure and dwell for the exact laminate.
Cutting open a tight package can damage the enclosed part.Add a controlled tear notch outside the sealed product area.
تطبيقات نموذجية
Used for vacuum packaging of precision assemblies, semiconductor hardware, medical components, clean tools, pharmaceutical-process parts and moisture- or oxygen-sensitive materials.
المعلمات الفنية
These ranges describe a transparent nylon/PE cleanroom vacuum pouch. Final gauge, dimensions and sealing cycle should be matched to component geometry, storage duration and required barrier performance.
| المواد الأساسية | Biaxially oriented nylon barrier layer laminated to heat-sealable LDPE |
|---|---|
| سمك اللوحة | 0.08-0.20 mm laminate thickness |
| العرض الفعال | 100-1270 mm bag width |
| الحد الأقصى الطول | 1500 mm bag length |
| الصلب يواجه سمك | 0 mm; no steel facing used |
| الكثافة الأساسية | 920-1150 kg/m³ combined polymer laminate |
| الموصلية الحرارية | 0.20-0.40 W/(m·K), layer ratio dependent |
| إنهاء السطح | Smooth high-clarity transparent coextruded laminate |
| نوع المشترك | Three factory heat-sealed sides with open vacuum-seal end |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
80-200 micron laminateFlat, three-side-seal or gusseted pouchEasy-tear notchAntistatic surface treatmentCustom dimensions and seal widthsDouble- or triple-bagged clean packaging
Planning a Cleanroom Vacuum Bag specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
