English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Одежда для чистых комнат, ИПП и расходные материалы
Вакуумная мешка для чистых помещений
Transparent nylon/PE cleanroom vacuum bag with high-barrier laminated film and a heat-sealable inner layer for protected component storage.
- Clear nylon/PE laminate retains vacuum better than monolayer PE
- Puncture-resistant outer nylon protects precision components
- Heat-sealable LDPE inner face forms a strong airtight closure
Введение продукции
The Cleanroom Vacuum Bag uses a biaxially oriented nylon barrier layer laminated to a clean polyethylene contact and seal layer. Compared with monolayer PE, the structure improves puncture resistance and reduces gas transmission, helping a qualified seal retain vacuum during storage. Its clear film supports visual inspection while controlled manufacture and double packaging aid clean transfer.
Основные характеристики
Polyethylene inner surface supports dependable heat sealing
Clear laminate allows identification without opening
Low gas transmission supports extended vacuum retention
Optional easy-tear notch permits gloved opening without blades
Обеспокоенность клиентов продуктами
Vacuum packaging can fail when sharp parts puncture film, seal areas wrinkle or gas permeates a low-barrier monolayer. Cleanliness and package-opening method also matter for sensitive components.
Component corners may puncture the evacuated film.Use a nylon-reinforced gauge and protective corner caps where needed.
Contamination or folds can create heat-seal channels.Keep the seal zone flat, dry and free of product contact.
Incorrect sealer settings may weaken or distort the laminate.Qualify sealing temperature, pressure and dwell for the exact laminate.
Cutting open a tight package can damage the enclosed part.Add a controlled tear notch outside the sealed product area.
Типичные приложения
Used for vacuum packaging of precision assemblies, semiconductor hardware, medical components, clean tools, pharmaceutical-process parts and moisture- or oxygen-sensitive materials.
Технические параметры
These ranges describe a transparent nylon/PE cleanroom vacuum pouch. Final gauge, dimensions and sealing cycle should be matched to component geometry, storage duration and required barrier performance.
| Основной материал | Biaxially oriented nylon barrier layer laminated to heat-sealable LDPE |
|---|---|
| Толщина панели | 0.08-0.20 mm laminate thickness |
| эффективная ширина | 100-1270 mm bag width |
| Максимальная длина | 1500 mm bag length |
| Толщина линий стали | 0 mm; no steel facing used |
| Плотность ядра | 920-1150 kg/m³ combined polymer laminate |
| Теплопроводимость | 0.20-0.40 W/(m·K), layer ratio dependent |
| Поверхностная отделка | Smooth high-clarity transparent coextruded laminate |
| Объединенный тип | Three factory heat-sealed sides with open vacuum-seal end |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
80-200 micron laminateFlat, three-side-seal or gusseted pouchEasy-tear notchAntistatic surface treatmentПользовательские размеры и ширины уплотненийDouble- or triple-bagged clean packaging
Planning a Cleanroom Vacuum Bag specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
