Clear nylon PE cleanroom vacuum bag in complete three-quarter view

Pakaian Bilik Bersih, PPE dan Barangan boleh guna

Beg vakum bilik bersih

Transparent nylon/PE cleanroom vacuum bag with high-barrier laminated film and a heat-sealable inner layer for protected component storage.

Clear nylon/PE laminate retains vacuum better than monolayer PE
Puncture-resistant outer nylon protects precision components
Heat-sealable LDPE inner face forms a strong airtight closure

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The Cleanroom Vacuum Bag uses a biaxially oriented nylon barrier layer laminated to a clean polyethylene contact and seal layer. Compared with monolayer PE, the structure improves puncture resistance and reduces gas transmission, helping a qualified seal retain vacuum during storage. Its clear film supports visual inspection while controlled manufacture and double packaging aid clean transfer.

Ciri-ciri Utama

Nylon layer improves tear, scuff and puncture resistance

Polyethylene inner surface supports dependable heat sealing

Clear laminate allows identification without opening

Low gas transmission supports extended vacuum retention

Optional easy-tear notch permits gloved opening without blades

Kebimbangan Produk Pelanggan

Vacuum packaging can fail when sharp parts puncture film, seal areas wrinkle or gas permeates a low-barrier monolayer. Cleanliness and package-opening method also matter for sensitive components.

Component corners may puncture the evacuated film.Use a nylon-reinforced gauge and protective corner caps where needed.

Contamination or folds can create heat-seal channels.Keep the seal zone flat, dry and free of product contact.

Incorrect sealer settings may weaken or distort the laminate.Qualify sealing temperature, pressure and dwell for the exact laminate.

Cutting open a tight package can damage the enclosed part.Add a controlled tear notch outside the sealed product area.

Permohonan yang biasa

Used for vacuum packaging of precision assemblies, semiconductor hardware, medical components, clean tools, pharmaceutical-process parts and moisture- or oxygen-sensitive materials.

Parameter teknikal

These ranges describe a transparent nylon/PE cleanroom vacuum pouch. Final gauge, dimensions and sealing cycle should be matched to component geometry, storage duration and required barrier performance.

Bahan Teras	Biaxially oriented nylon barrier layer laminated to heat-sealable LDPE
Ketebalan Panel	0.08-0.20 mm laminate thickness
Lebar berkesan	100-1270 mm bag width
Panjang maksimum	1500 mm bag length
Keluli Menghadapi Ketebalan	0 mm; tiada keluli menghadap digunakan
Ketumpatan teras	920-1150 kg/m³ combined polymer laminate
Kekonduksian Terma	0.20-0.40 W/(m·K), layer ratio dependent
Kemasan permukaan	Smooth high-clarity transparent coextruded laminate
Jenis Bersatu	Three factory heat-sealed sides with open vacuum-seal end
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

80-200 micron laminateFlat, three-side-seal or gusseted pouchEasy-tear notchAntistatic surface treatmentCustom dimensions and seal widthsDouble- or triple-bagged clean packaging

Planning a Cleanroom Vacuum Bag specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami