English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة الجدار والسقف للغرفة النظيفة
لوحة واجهة المساعدة الغرف النظيفة
A flush 316L stainless steel interface station that organizes process gas, liquid, vacuum, electrical, data and instrumentation connections at the cleanroom boundary.
- 316L Hygienic Interface
- Multi-Utility Integration
- Flush Wall Mounting
- External Service Maintenance
مقدمة المنتج
Cleanroom Utility Interface Panels consolidate point-of-use services into one smooth wall or ceiling station. A polished 316L stainless steel plate carries sanitary liquid and gas outlets alongside power, data, vacuum, communication or instrument connections, reducing scattered penetrations through the room envelope. The panel can be flush-mounted in modular walls, integrated into a service column or arranged as a ceiling interface. Internal pipework and conduits remain in the technical zone so most maintenance can occur without bringing tools and components into the process area.
الخصائص الرئيسية
Polished 316L stainless steel provides a corrosion-resistant and readily wiped process-side interface.
Beveled or radiused exposed edges avoid sharp ledges around the flush wall opening.
Rear service routing keeps valves, pipework and electrical components outside the primary production space.
Mixed connection layouts support liquid, gas, vacuum, power, data and instrumentation at one location.
مخاوف المنتج للعملاء
A utility interface must control numerous wall penetrations, keep incompatible services clearly separated and remain cleanable around every outlet.
Scattered utility outlets multiply difficult-to-seal penetrations across the cleanroom wall.A single framed interface plate groups connections within one controlled perimeter seal.
Maintenance inside the production room introduces tools and opened components into the clean area.Rear-access pipework, conduits and valves remain serviceable from the technical side of the wall.
Poor outlet labeling creates a risk of connecting equipment to the wrong service.Engraved labels, color coding and physically separated connector groups make each utility identifiable.
Crevices around individual fittings trap cleaning residue.Sanitary bulkhead fittings and a smooth polished plate close each penetration with a wipeable interface.
تطبيقات نموذجية
Pharmaceutical process suitesBiotechnology process-support laboratoriesClean utility point-of-use stationsCIP and SIP routing interfacesMedical and research cleanrooms
المعلمات الفنية
Typical construction ranges for flush cleanroom utility interface panels are listed below.
| المواد الأساسية | Solid AISI 316L stainless steel interface plate and support frame |
|---|---|
| سمك اللوحة | 2.0–3.0 mm interface plate thickness |
| العرض الفعال | 300–1200 mm interface width |
| الحد الأقصى الطول | 2000 mm interface height |
| الصلب يواجه سمك | 2.0–3.0 mm 316L stainless steel plate |
| الكثافة الأساسية | N/A — solid service interface without insulation core |
| الموصلية الحرارية | N/A — utility connection station, not an insulating panel |
| إنهاء السطح | Mechanically polished or electropolished 316L stainless steel, typically Ra ≤ 0.8 µm |
| نوع المشترك | Flush framed wall or ceiling interface with sanitary bulkhead fittings and perimeter gasket |
| التخصيص | متاح بناءً على التطبيق المقصود وبيئة التشغيل |
الخيارات المتاحة
Wall, ceiling, column or pedestal mountingLiquid, gas, vacuum and WFI outletsPower, data and instrument connectionsEngraved service labels and color coding
Planning a Cleanroom Utility Interface Panel specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
