English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Стенные и потолочные системы для чистых комнат
Интерфейсная панель утилиты для чистых помещений
A flush 316L stainless steel interface station that organizes process gas, liquid, vacuum, electrical, data and instrumentation connections at the cleanroom boundary.
- 316L Hygienic Interface
- Multi-Utility Integration
- Flush Wall Mounting
- External Service Maintenance
Введение продукции
Cleanroom Utility Interface Panels consolidate point-of-use services into one smooth wall or ceiling station. A polished 316L stainless steel plate carries sanitary liquid and gas outlets alongside power, data, vacuum, communication or instrument connections, reducing scattered penetrations through the room envelope. The panel can be flush-mounted in modular walls, integrated into a service column or arranged as a ceiling interface. Internal pipework and conduits remain in the technical zone so most maintenance can occur without bringing tools and components into the process area.
Основные характеристики
Polished 316L stainless steel provides a corrosion-resistant and readily wiped process-side interface.
Beveled or radiused exposed edges avoid sharp ledges around the flush wall opening.
Rear service routing keeps valves, pipework and electrical components outside the primary production space.
Mixed connection layouts support liquid, gas, vacuum, power, data and instrumentation at one location.
Обеспокоенность клиентов продуктами
A utility interface must control numerous wall penetrations, keep incompatible services clearly separated and remain cleanable around every outlet.
Scattered utility outlets multiply difficult-to-seal penetrations across the cleanroom wall.A single framed interface plate groups connections within one controlled perimeter seal.
Maintenance inside the production room introduces tools and opened components into the clean area.Rear-access pipework, conduits and valves remain serviceable from the technical side of the wall.
Poor outlet labeling creates a risk of connecting equipment to the wrong service.Engraved labels, color coding and physically separated connector groups make each utility identifiable.
Crevices around individual fittings trap cleaning residue.Sanitary bulkhead fittings and a smooth polished plate close each penetration with a wipeable interface.
Типичные приложения
Pharmaceutical process suitesBiotechnology process-support laboratoriesClean utility point-of-use stationsCIP and SIP routing interfacesMedical and research cleanrooms
Технические параметры
Typical construction ranges for flush cleanroom utility interface panels are listed below.
| Основной материал | Solid AISI 316L stainless steel interface plate and support frame |
|---|---|
| Толщина панели | 2.0–3.0 mm interface plate thickness |
| эффективная ширина | 300–1200 mm interface width |
| Максимальная длина | 2000 mm interface height |
| Толщина линий стали | 2.0–3.0 mm 316L stainless steel plate |
| Плотность ядра | N/A — solid service interface without insulation core |
| Теплопроводимость | N/A — utility connection station, not an insulating panel |
| Поверхностная отделка | Mechanically polished or electropolished 316L stainless steel, typically Ra ≤ 0.8 µm |
| Объединенный тип | Flush framed wall or ceiling interface with sanitary bulkhead fittings and perimeter gasket |
| Customization | Доступно в зависимости от предполагаемого приложения и операционной среды |
Доступные варианты
Wall, ceiling, column or pedestal mountingLiquid, gas, vacuum and WFI outletsPower, data and instrument connectionsEngraved service labels and color coding
Planning a Cleanroom Utility Interface Panel specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
