Complete 316L stainless steel cleanroom utility interface panel

Dinding bilik bersih dan sistem siling

Panel Antarmuka Utiliti Bilik Bersih

A flush 316L stainless steel interface station that organizes process gas, liquid, vacuum, electrical, data and instrumentation connections at the cleanroom boundary.

316L Hygienic Interface
Multi-Utility Integration
Flush Wall Mounting
External Service Maintenance

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

Cleanroom Utility Interface Panels consolidate point-of-use services into one smooth wall or ceiling station. A polished 316L stainless steel plate carries sanitary liquid and gas outlets alongside power, data, vacuum, communication or instrument connections, reducing scattered penetrations through the room envelope. The panel can be flush-mounted in modular walls, integrated into a service column or arranged as a ceiling interface. Internal pipework and conduits remain in the technical zone so most maintenance can occur without bringing tools and components into the process area.

Ciri-ciri Utama

One coordinated plate reduces the number of separate service penetrations through the cleanroom wall.

Polished 316L stainless steel provides a corrosion-resistant and readily wiped process-side interface.

Beveled or radiused exposed edges avoid sharp ledges around the flush wall opening.

Rear service routing keeps valves, pipework and electrical components outside the primary production space.

Mixed connection layouts support liquid, gas, vacuum, power, data and instrumentation at one location.

Kebimbangan Produk Pelanggan

A utility interface must control numerous wall penetrations, keep incompatible services clearly separated and remain cleanable around every outlet.

Scattered utility outlets multiply difficult-to-seal penetrations across the cleanroom wall.A single framed interface plate groups connections within one controlled perimeter seal.

Maintenance inside the production room introduces tools and opened components into the clean area.Rear-access pipework, conduits and valves remain serviceable from the technical side of the wall.

Poor outlet labeling creates a risk of connecting equipment to the wrong service.Engraved labels, color coding and physically separated connector groups make each utility identifiable.

Crevices around individual fittings trap cleaning residue.Sanitary bulkhead fittings and a smooth polished plate close each penetration with a wipeable interface.

Permohonan yang biasa

Pharmaceutical process suitesBiotechnology process-support laboratoriesClean utility point-of-use stationsCIP and SIP routing interfacesMedical and research cleanrooms

Parameter teknikal

Typical construction ranges for flush cleanroom utility interface panels are listed below.

Bahan Teras	Solid AISI 316L stainless steel interface plate and support frame
Ketebalan Panel	2.0–3.0 mm interface plate thickness
Lebar berkesan	300–1200 mm interface width
Panjang maksimum	2000 mm interface height
Keluli Menghadapi Ketebalan	2.0–3.0 mm 316L stainless steel plate
Ketumpatan teras	N/A — solid service interface without insulation core
Kekonduksian Terma	N/A — utility connection station, not an insulating panel
Kemasan permukaan	Mechanically polished or electropolished 316L stainless steel, typically Ra ≤ 0.8 µm
Jenis Bersatu	Flush framed wall or ceiling interface with sanitary bulkhead fittings and perimeter gasket
Penyesuaian	Terdapat berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi

Pilihan yang boleh didapati

Wall, ceiling, column or pedestal mountingLiquid, gas, vacuum and WFI outletsPower, data and instrument connectionsEngraved service labels and color coding

Planning a Cleanroom Utility Interface Panel specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami