English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
مناولة وتخزين مواد الغرف النظيفة
غرفة نظيفة رافعة كهربائية
A stainless cleanroom electric hoist using a low-particle flat lifting belt, enclosed drive and pendant control for hygienic material handling.
- Lubrication-free flat belt keeps exposed lifting media clean
- Enclosed stainless housing simplifies controlled-area wipe-down
- Smooth, precise lifting for sensitive cleanroom loads
مقدمة المنتج
The cleanroom electric hoist replaces an exposed chain with a high-strength synthetic flat belt and encloses the motor, brake and transmission within a smooth stainless housing. A belt wiper limits carried-in residue, while corrosion-resistant trolley and hook components support frequent surface cleaning. The compact arrangement suits workstations and short monorails where operators need repeatable vertical handling without conventional chain lubricant near the process.
الخصائص الرئيسية
Gasketed stainless drive enclosure presents smooth wipeable surfaces.
Polymer trolley wheels provide quiet travel with low abrasion.
Pendant controls separate lift commands and emergency stop functions.
Safety-latch hook helps retain suspended tooling during positioning.
مخاوف المنتج للعملاء
Conventional chain hoists can expose lubricant, crevices and abrasion debris directly above sensitive products, while abrupt movement makes precise placement difficult.
Lubricant near open process areasThe synthetic belt lifts without exposed chain oil or grease.
Particle traps on the hoist bodyThe enclosed stainless housing uses smooth accessible exterior surfaces.
Unstable load positioningConfigurable lifting speed and responsive pendant control support controlled alignment.
Trolley abrasion and noiseClean-compatible polymer wheels reduce metal-on-metal rolling contact.
تطبيقات نموذجية
Controlled lifting of vessels, tooling, product carriers and process components in pharmaceutical suites, biotechnology facilities, medical-device production and semiconductor cleanrooms.
المعلمات الفنية
The belt is wound inside the sealed drive housing and passes through a close-clearance outlet wiper to the lower hook block. Load rating, lift height, travel speed and electrical supply are selected for the duty cycle; trolley geometry is matched to the supporting beam. Stainless external parts and clean-compatible polymers reduce particle traps while retaining accessible inspection points.
| المواد الأساسية | 304 or 316L stainless steel enclosure with high-strength synthetic flat lifting belt |
|---|---|
| سمك اللوحة | 2.0–3.0 mm enclosure panels |
| العرض الفعال | 250–600 mm hoist body and trolley assembly |
| الحد الأقصى الطول | Up to 12000 mm configurable lifting travel |
| الصلب يواجه سمك | 1.5–2.5 mm |
| الكثافة الأساسية | 8000 كجم / m3 كثافة الفولاذ المقاوم للصدأ الاسمية |
| الموصلية الحرارية | حوالي 14.6-16.2 W / (m·K) في درجة حرارة الغرفة |
| إنهاء السطح | Fine-brushed or electropolished stainless steel with clean-compatible polymer belt and wheels |
| نوع المشترك | Gasketed drive enclosure, beam-matched trolley and flat-belt hook-block connection |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
304 or 316L stainless steel, manual or powered trolley travel, variable-speed drive, alternative lift heights, radio control, stainless pendant, load display and application-specific hooks or lifting fixtures.
Planning a Cleanroom Electric Hoist specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
