영어
독일어
아랍어
프랑스어
인도네시아어
일본어
한국어현재 Current
말레이어
포르투갈어
러시아어
스페인어
태국어
터키어
베트남어
클린룸 재료 취급 및 보관
클린룸 전기 리프트
A stainless cleanroom electric hoist using a low-particle flat lifting belt, enclosed drive and pendant control for hygienic material handling.
- Lubrication-free flat belt keeps exposed lifting media clean
- Enclosed stainless housing simplifies controlled-area wipe-down
- Smooth, precise lifting for sensitive cleanroom loads
상품 소개
The cleanroom electric hoist replaces an exposed chain with a high-strength synthetic flat belt and encloses the motor, brake and transmission within a smooth stainless housing. A belt wiper limits carried-in residue, while corrosion-resistant trolley and hook components support frequent surface cleaning. The compact arrangement suits workstations and short monorails where operators need repeatable vertical handling without conventional chain lubricant near the process.
주요 기능
Gasketed stainless drive enclosure presents smooth wipeable surfaces.
Polymer trolley wheels provide quiet travel with low abrasion.
Pendant controls separate lift commands and emergency stop functions.
Safety-latch hook helps retain suspended tooling during positioning.
고객 제품 관심사
Conventional chain hoists can expose lubricant, crevices and abrasion debris directly above sensitive products, while abrupt movement makes precise placement difficult.
Lubricant near open process areasThe synthetic belt lifts without exposed chain oil or grease.
Particle traps on the hoist bodyThe enclosed stainless housing uses smooth accessible exterior surfaces.
Unstable load positioningConfigurable lifting speed and responsive pendant control support controlled alignment.
Trolley abrasion and noiseClean-compatible polymer wheels reduce metal-on-metal rolling contact.
일반적인 응용 프로그램
Controlled lifting of vessels, tooling, product carriers and process components in pharmaceutical suites, biotechnology facilities, medical-device production and semiconductor cleanrooms.
기술 매개변수
The belt is wound inside the sealed drive housing and passes through a close-clearance outlet wiper to the lower hook block. Load rating, lift height, travel speed and electrical supply are selected for the duty cycle; trolley geometry is matched to the supporting beam. Stainless external parts and clean-compatible polymers reduce particle traps while retaining accessible inspection points.
| 핵심 재료 | 304 or 316L stainless steel enclosure with high-strength synthetic flat lifting belt |
|---|---|
| 패널 두께 | 2.0–3.0 mm enclosure panels |
| 유효 폭 | 250–600 mm hoist body and trolley assembly |
| 최대 길이 | Up to 12000 mm configurable lifting travel |
| 강철 면면 두께 | 1.5–2.5 mm |
| 코어 밀도 | 8000 kg / m 3 명칭 스테인레스 강철 밀도 |
| 열전도도 (Thermal Conductivity) | 약 14. 6 - 16. 2 W / (m · K) 실온에서 |
| 표면 마무리 | Fine-brushed or electropolished stainless steel with clean-compatible polymer belt and wheels |
| 접합 유형 | Gasketed drive enclosure, beam-matched trolley and flat-belt hook-block connection |
| 사용자 정의 | 의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다. |
사용 가능한 옵션
304 or 316L stainless steel, manual or powered trolley travel, variable-speed drive, alternative lift heights, radio control, stainless pendant, load display and application-specific hooks or lifting fixtures.
Planning a Cleanroom Electric Hoist specification?
치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.
