English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
إضاءة الغرف النظيفة والمعدات الكهربائية
Cleanroom ساعة رقمية
A flush synchronized LED clock with a sealed glass face that shows hours, minutes and seconds from across the cleanroom.
- Flush Stainless and Glass Face
- Hours-Minutes-Seconds Display
- Network Time Synchronization
- Red or Green LED Digits
مقدمة المنتج
The cleanroom digital clock fits within a wall recess so its tempered glass face and stainless trim align with the room surface. Large high-contrast LED digits show time and seconds, with optional timer or stopwatch functions for process work. NTP, impulse, serial or independent quartz control keeps the display synchronized to the facility time source.
الخصائص الرئيسية
Bright digits remain readable at long distance and wide viewing angles.
Continuous seconds display supports timed cleanroom procedures.
Network synchronization keeps multiple rooms on one time reference.
A sealed rear connection isolates power and data wiring from the room.
مخاوف المنتج للعملاء
Accurate time must remain easy to read without a projecting clock body, open ventilation slots or local manual adjustment.
Wall clocks collect dust along their upper housing edge.A recessed frame places the glass face nearly flush with the wall.
Independent clocks drift apart across rooms.NTP or master-clock input synchronizes every display to one source.
Small seconds digits are unreadable during a procedure.Equal-height HMS digits make elapsed timing visible from the work zone.
Chemical wiping damages an unprotected plastic display.Tempered glass shields the LED modules from direct cleaning contact.
تطبيقات نموذجية
Operating and procedure roomsCleanroom production timingLaboratory test areasGowning and airlock time display
المعلمات الفنية
Typical configurable construction ranges for a cleanroom digital clock are listed below.
| المواد الأساسية | SUS304 front frame with tempered-glass face, LED digit modules, controller and steel recessed back box |
|---|---|
| سمك اللوحة | 60-110 mm recessed clock depth |
| العرض الفعال | 350-750 mm visible display width |
| الحد الأقصى الطول | Up to 800 mm overall clock dimension |
| الصلب يواجه سمك | 1.5-2.5 mm stainless front frame and mounting plate |
| الكثافة الأساسية | Approximately 2500 kg/m³ for the tempered-glass display face |
| الموصلية الحرارية | 0.8-1.1 W/(m·K) for the tempered-glass face |
| إنهاء السطح | Fine-brushed stainless trim with clear glass and red or green LED numerals |
| نوع المشترك | Flush gasketed frame with sealed glass face and rear power/time-signal terminal box |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Red or green digitsHMS clock or stopwatch modeNTP, impulse or standalone synchronizationRemote timer keypad
Planning a Cleanroom Digital Clock specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
