Cleanroom digital clock with stainless flush frame and red LED time display

クリーンルーム照明 · 電気機器

クリーンルームデジタル時計

A flush synchronized LED clock with a sealed glass face that shows hours, minutes and seconds from across the cleanroom.

Flush Stainless and Glass Face
Hours-Minutes-Seconds Display
Network Time Synchronization
Red or Green LED Digits

見積もりリクエスト製品案内

商品紹介

The cleanroom digital clock fits within a wall recess so its tempered glass face and stainless trim align with the room surface. Large high-contrast LED digits show time and seconds, with optional timer or stopwatch functions for process work. NTP, impulse, serial or independent quartz control keeps the display synchronized to the facility time source.

主要な特徴

The smooth glass front withstands routine wiping without exposed digit segments.

Bright digits remain readable at long distance and wide viewing angles.

Continuous seconds display supports timed cleanroom procedures.

Network synchronization keeps multiple rooms on one time reference.

A sealed rear connection isolates power and data wiring from the room.

お客様の製品に関する懸念事項

Accurate time must remain easy to read without a projecting clock body, open ventilation slots or local manual adjustment.

Wall clocks collect dust along their upper housing edge.A recessed frame places the glass face nearly flush with the wall.

Independent clocks drift apart across rooms.NTP or master-clock input synchronizes every display to one source.

Small seconds digits are unreadable during a procedure.Equal-height HMS digits make elapsed timing visible from the work zone.

Chemical wiping damages an unprotected plastic display.Tempered glass shields the LED modules from direct cleaning contact.

典型的な用途

Operating and procedure roomsCleanroom production timingLaboratory test areasGowning and airlock time display

技術的なパラメータ

Typical configurable construction ranges for a cleanroom digital clock are listed below.

コア材料	SUS304 front frame with tempered-glass face, LED digit modules, controller and steel recessed back box
パネルの厚さ	60-110 mm recessed clock depth
有効幅	350-750 mm visible display width
最大長さ	Up to 800 mm overall clock dimension
鋼鉄の厚さを直面する	1.5-2.5 mm stainless front frame and mounting plate
コア密度	Approximately 2500 kg/m³ for the tempered-glass display face
熱伝導率	0.8-1.1 W/(m·K) for the tempered-glass face
表面仕上げ	Fine-brushed stainless trim with clear glass and red or green LED numerals
ジョイントタイプ	Flush gasketed frame with sealed glass face and rear power/time-signal terminal box
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Red or green digitsHMS clock or stopwatch modeNTP, impulse or standalone synchronizationRemote timer keypad

Planning a Cleanroom Digital Clock specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する