Cleanroom digital clock with stainless flush frame and red LED time display

클린룸 조명 및 전기 장비

클린룸 디지털 시계

A flush synchronized LED clock with a sealed glass face that shows hours, minutes and seconds from across the cleanroom.

Flush Stainless and Glass Face
Hours-Minutes-Seconds Display
Network Time Synchronization
Red or Green LED Digits

견적 요청 제품 찾아보기

상품 소개

The cleanroom digital clock fits within a wall recess so its tempered glass face and stainless trim align with the room surface. Large high-contrast LED digits show time and seconds, with optional timer or stopwatch functions for process work. NTP, impulse, serial or independent quartz control keeps the display synchronized to the facility time source.

주요 기능

The smooth glass front withstands routine wiping without exposed digit segments.

Bright digits remain readable at long distance and wide viewing angles.

Continuous seconds display supports timed cleanroom procedures.

Network synchronization keeps multiple rooms on one time reference.

A sealed rear connection isolates power and data wiring from the room.

고객 제품 관심사

Accurate time must remain easy to read without a projecting clock body, open ventilation slots or local manual adjustment.

Wall clocks collect dust along their upper housing edge.A recessed frame places the glass face nearly flush with the wall.

Independent clocks drift apart across rooms.NTP or master-clock input synchronizes every display to one source.

Small seconds digits are unreadable during a procedure.Equal-height HMS digits make elapsed timing visible from the work zone.

Chemical wiping damages an unprotected plastic display.Tempered glass shields the LED modules from direct cleaning contact.

일반적인 응용 프로그램

Operating and procedure roomsCleanroom production timingLaboratory test areasGowning and airlock time display

기술 매개변수

Typical configurable construction ranges for a cleanroom digital clock are listed below.

핵심 재료	SUS304 front frame with tempered-glass face, LED digit modules, controller and steel recessed back box
패널 두께	60-110 mm recessed clock depth
유효 폭	350-750 mm visible display width
최대 길이	Up to 800 mm overall clock dimension
강철 면면 두께	1.5-2.5 mm stainless front frame and mounting plate
코어 밀도	Approximately 2500 kg/m³ for the tempered-glass display face
열전도도 (Thermal Conductivity)	0.8-1.1 W/(m·K) for the tempered-glass face
표면 마무리	Fine-brushed stainless trim with clear glass and red or green LED numerals
접합 유형	Flush gasketed frame with sealed glass face and rear power/time-signal terminal box
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Red or green digitsHMS clock or stopwatch modeNTP, impulse or standalone synchronizationRemote timer keypad

Planning a Cleanroom Digital Clock specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.