Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Iluminación de sala limpia y equipos eléctricos
Reloj Digital Cleanroom
A flush synchronized LED clock with a sealed glass face that shows hours, minutes and seconds from across the cleanroom.
- Flush Stainless and Glass Face
- Hours-Minutes-Seconds Display
- Network Time Synchronization
- Red or Green LED Digits
Introducción del producto
The cleanroom digital clock fits within a wall recess so its tempered glass face and stainless trim align with the room surface. Large high-contrast LED digits show time and seconds, with optional timer or stopwatch functions for process work. NTP, impulse, serial or independent quartz control keeps the display synchronized to the facility time source.
Características clave
Bright digits remain readable at long distance and wide viewing angles.
Continuous seconds display supports timed cleanroom procedures.
Network synchronization keeps multiple rooms on one time reference.
A sealed rear connection isolates power and data wiring from the room.
Preocupaciones del producto del cliente
Accurate time must remain easy to read without a projecting clock body, open ventilation slots or local manual adjustment.
Wall clocks collect dust along their upper housing edge.A recessed frame places the glass face nearly flush with the wall.
Independent clocks drift apart across rooms.NTP or master-clock input synchronizes every display to one source.
Small seconds digits are unreadable during a procedure.Equal-height HMS digits make elapsed timing visible from the work zone.
Chemical wiping damages an unprotected plastic display.Tempered glass shields the LED modules from direct cleaning contact.
Aplicaciones típicas
Operating and procedure roomsCleanroom production timingLaboratory test areasGowning and airlock time display
Parámetros técnicos
Typical configurable construction ranges for a cleanroom digital clock are listed below.
| Materiales Core | SUS304 front frame with tempered-glass face, LED digit modules, controller and steel recessed back box |
|---|---|
| Panel de espesor | 60-110 mm recessed clock depth |
| Ancho efectivo | 350-750 mm visible display width |
| Longitud máxima | Up to 800 mm overall clock dimension |
| Acero frente a espesor | 1.5-2.5 mm stainless front frame and mounting plate |
| Densidad Core | Approximately 2500 kg/m³ for the tempered-glass display face |
| Conductividad térmica | 0.8-1.1 W/(m·K) for the tempered-glass face |
| Superficie acabada | Fine-brushed stainless trim with clear glass and red or green LED numerals |
| Tipo conjunto | Flush gasketed frame with sealed glass face and rear power/time-signal terminal box |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Red or green digitsHMS clock or stopwatch modeNTP, impulse or standalone synchronizationRemote timer keypad
Planning a Cleanroom Digital Clock specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
