موردك الموحد لمعدات الغرف النظيفة وأساسيات المرافق العقليةدعم المشاريع الدولية
Open mobile navigationClose mobile navigation
أنظمة الجدار والسقف للغرفة النظيفة

Cleanroom خليج قاعدة تنورة

A hygienic skirting profile that protects the lower cleanroom wall and forms a smooth, sealable transition to vinyl, resin or other continuous flooring systems.
  • Rounded Wall-to-Floor Transition
  • Lower-Wall Impact Protection
  • Sealed Hygienic Edges
  • Aluminum or PVC Construction
طلب عرض أسعار تصفح المنتجات

مقدمة المنتج

Cleanroom Cove Base Skirting replaces a sharp wall-to-floor corner with a smooth, closed transition that is easier to wipe and inspect. The profile can be supplied as powder-coated aluminum for rigidity or hard PVC for chemical compatibility with common hygienic wall finishes. A concealed backing or adhesive bed supports the visible face, while sealed upper and lower edges stop wash water and debris entering behind the trim. The skirting also shields the vulnerable lower wall from footwear, cleaning machines and light trolley contact without introducing ledges that trap contamination.

الخصائص الرئيسية

A continuous curved face removes the narrow floor corner that is difficult to reach during cleaning.

The raised skirting protects panel skins from low-level scuffs and routine cleaning equipment.

Concealed clips or adhesive keep screw heads away from the exposed hygienic surface.

Sealable top and floor edges prevent liquid and debris from migrating behind the profile.

Aluminum and hard-PVC variants coordinate with resin, vinyl and modular wall finishes.

مخاوف المنتج للعملاء

A cleanroom skirting must close the floor junction, resist routine knocks and remain compatible with both the wall finish and the flooring system.

Dust and cleaning residue collect in a sharp 90-degree wall-to-floor corner.The coved face creates a broad radius that can be wiped in one continuous pass.
Water entering behind loose skirting can remain hidden against the wall base.Continuous upper and lower sealant lines close the profile against both adjoining finishes.
Trolley wheels and floor machines repeatedly mark the lowest part of a wall panel.A rigid raised profile receives light contact before it reaches the finished wall surface.
A mismatched trim can react differently to disinfectants than the surrounding room finish.Material and coating options allow the exposed skirting to match the intended cleaning chemistry.

تطبيقات نموذجية

Pharmaceutical production roomsFood and beverage clean areasLaboratory corridorsCove skirting for medical-device clean productionCleanroom change and wash areas

المعلمات الفنية

Common dimensions and materials for cleanroom cove base skirting are listed below.

المواد الأساسية6063 aluminum extrusion or solid hygienic PVC
سمك اللوحة1.0–2.0 mm profile wall thickness
العرض الفعال50–100 mm exposed skirting height
الحد الأقصى الطول3000 mm per section
الصلب يواجه سمكN/A — skirting is aluminum or PVC, not steel-faced
الكثافة الأساسيةN/A — solid or hollow extrusion without insulation core
الموصلية الحراريةN/A — not specified as an insulating panel
إنهاء السطحPolyester powder-coated aluminum, anodized aluminum or smooth hard PVC
نوع المشتركConcealed clip or adhesive fixing with sealed top and floor edges
التخصيصمتاح بناءً على التطبيق المقصود وبيئة التشغيل

الخيارات المتاحة

Powder-coated aluminumHard PVC faceInternal and external corner piecesEnd caps and pre-cut lengths

Planning a Cleanroom Cove Base Skirting specification?

أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.

تحدث مع فريقنا
E البريد الإلكتروني لنا WhatsApp WeChat

الرئيسية

المنتجات

الأخبار

من نحن

اتصل بنا