Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam
Sistem Dinding dan Langit-langit Cleanroom
Cleanroom Cove Base Skirting
A hygienic skirting profile that protects the lower cleanroom wall and forms a smooth, sealable transition to vinyl, resin or other continuous flooring systems.
- Rounded Wall-to-Floor Transition
- Lower-Wall Impact Protection
- Sealed Hygienic Edges
- Aluminum or PVC Construction
Perkenalan produk
Cleanroom Cove Base Skirting replaces a sharp wall-to-floor corner with a smooth, closed transition that is easier to wipe and inspect. The profile can be supplied as powder-coated aluminum for rigidity or hard PVC for chemical compatibility with common hygienic wall finishes. A concealed backing or adhesive bed supports the visible face, while sealed upper and lower edges stop wash water and debris entering behind the trim. The skirting also shields the vulnerable lower wall from footwear, cleaning machines and light trolley contact without introducing ledges that trap contamination.
Fitur utama:
The raised skirting protects panel skins from low-level scuffs and routine cleaning equipment.
Concealed clips or adhesive keep screw heads away from the exposed hygienic surface.
Sealable top and floor edges prevent liquid and debris from migrating behind the profile.
Aluminum and hard-PVC variants coordinate with resin, vinyl and modular wall finishes.
Kekhawatiran produk pelanggan
A cleanroom skirting must close the floor junction, resist routine knocks and remain compatible with both the wall finish and the flooring system.
Dust and cleaning residue collect in a sharp 90-degree wall-to-floor corner.The coved face creates a broad radius that can be wiped in one continuous pass.
Water entering behind loose skirting can remain hidden against the wall base.Continuous upper and lower sealant lines close the profile against both adjoining finishes.
Trolley wheels and floor machines repeatedly mark the lowest part of a wall panel.A rigid raised profile receives light contact before it reaches the finished wall surface.
A mismatched trim can react differently to disinfectants than the surrounding room finish.Material and coating options allow the exposed skirting to match the intended cleaning chemistry.
Aplikasi yang Tipis
Pharmaceutical production roomsFood and beverage clean areasKoridor LaboratoriumCove skirting for medical-device clean productionCleanroom change and wash areas
Parameter teknis
Common dimensions and materials for cleanroom cove base skirting are listed below.
| Bahan inti | 6063 aluminum extrusion or solid hygienic PVC |
|---|---|
| Ketebalan Panel (Panel Thickness) | 1.0–2.0 mm profile wall thickness |
| Efektif lebar | 50–100 mm exposed skirting height |
| Panjang maksimum | 3000 mm per section |
| Baja menghadap ketebalan | N/A — skirting is aluminum or PVC, not steel-faced |
| Kepadatan inti (core density) | N/A — solid or hollow extrusion without insulation core |
| Konduktivitas Termal (Thermal Conductivity) | N/A — not specified as an insulating panel |
| Permukaan selesai | Polyester powder-coated aluminum, anodized aluminum or smooth hard PVC |
| Jenis Bersama | Concealed clip or adhesive fixing with sealed top and floor edges |
| Customization (Kustomisasi) | A Tersedia berdasarkan aplikasi dan lingkungan operasi yang dimaksudkan |
Pilihan yang tersedia
Powder-coated aluminumHard PVC faceInternal and external corner piecesEnd caps and pre-cut lengths
Planning a Cleanroom Cove Base Skirting specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
