English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أبواب الغرف النظيفة ونوافذ وأنظمة التشابك
Aالتلقائي غرف الأبحاث انزلاق الباب
A motorised cleanroom sliding doorset with touchless activation, adjustable travel, safety monitoring and a smooth insulated leaf for high-frequency hands-free passage.
- Touchless Automatic Operation
- Brushless Motor Drive
- Adjustable Opening and Closing
- Monitored Safety Sensors
مقدمة المنتج
The Automatic Cleanroom Sliding Door adds a compact drive motor, controller and safety sensors to an overhead sliding leaf. Foot, elbow, wave or access-control signals open the door without hand contact, while the controller monitors position and regulates acceleration and closing speed. A polyurethane-cored steel leaf keeps moving mass controlled, and the accessible operator cover allows routine adjustment without disturbing the wall opening.
الخصائص الرئيسية
Controlled acceleration limits air disturbance and mechanical shock at the end positions.
Safety presence detection reverses or holds the leaf when the opening is occupied.
A low-mass polyurethane-cored leaf reduces the drive load for frequent cycles.
Integrated status contacts support interlocks, access control and building monitoring.
مخاوف المنتج للعملاء
Automatic sliding doors must combine hands-free convenience with safe sensing, restrained air movement and accessible drive maintenance.
Operators carrying sterile materials cannot use a manual handle safely.Wave, foot or access-control activation opens the doorway without hand contact.
Fast leaf movement creates unnecessary air turbulence at the cleanroom boundary.Programmable acceleration, travel speed and hold-open time adapt movement to the traffic pattern.
A closing leaf can contact people or carts in the opening.Presence and anti-pinch sensors monitor the travel zone and command safe reversal.
Drive faults make a concealed operator difficult to service.A removable overhead cover exposes the motor, belt and controller from the room side.
تطبيقات نموذجية
Pharmaceutical personnel routesHospital clean areasTouchless laboratory entrancesElectronics production corridorsHigh-frequency cleanroom material flow
المعلمات الفنية
Typical physical construction values for an automatic cleanroom sliding doorset are shown below.
| المواد الأساسية | Closed-cell rigid polyurethane foam |
|---|---|
| سمك اللوحة | 40-50 mm sliding door leaf |
| العرض الفعال | 750-1600 mm single-sliding clear opening |
| الحد الأقصى الطول | 2400 mm maximum leaf height |
| الصلب يواجه سمك | 0.8-1.0 mm powder-coated steel skins |
| الكثافة الأساسية | 40-45 kg/m³ polyurethane |
| الموصلية الحرارية | 0.022-0.028 W/(m·K) typical polyurethane core range |
| إنهاء السطح | Smooth powder-coated steel or brushed stainless steel |
| نوع المشترك | Motor-driven overhead rail with monitored safety edge and perimeter brush/EPDM seals |
| التخصيص | متاح بناءً على التطبيق المقصود وبيئة التشغيل |
الخيارات المتاحة
Wave, foot or radar activationBattery backupBi-parting double leavesInterlock and access-control integration
Planning a Automatic Cleanroom Sliding Door specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
