Complete automatic cleanroom sliding door with overhead operator

Pintu Bilik Bersih, Windows dan Sistem Interlock

Pintu gelangsar bilik bersih automatik

A motorised cleanroom sliding doorset with touchless activation, adjustable travel, safety monitoring and a smooth insulated leaf for high-frequency hands-free passage.

Touchless Automatic Operation
Brushless Motor Drive
Adjustable Opening and Closing
Monitored Safety Sensors

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The Automatic Cleanroom Sliding Door adds a compact drive motor, controller and safety sensors to an overhead sliding leaf. Foot, elbow, wave or access-control signals open the door without hand contact, while the controller monitors position and regulates acceleration and closing speed. A polyurethane-cored steel leaf keeps moving mass controlled, and the accessible operator cover allows routine adjustment without disturbing the wall opening.

Ciri-ciri Utama

Hands-free activation reduces handle contact during material and personnel movement.

Controlled acceleration limits air disturbance and mechanical shock at the end positions.

Safety presence detection reverses or holds the leaf when the opening is occupied.

A low-mass polyurethane-cored leaf reduces the drive load for frequent cycles.

Integrated status contacts support interlocks, access control and building monitoring.

Kebimbangan Produk Pelanggan

Automatic sliding doors must combine hands-free convenience with safe sensing, restrained air movement and accessible drive maintenance.

Operators carrying sterile materials cannot use a manual handle safely.Wave, foot or access-control activation opens the doorway without hand contact.

Fast leaf movement creates unnecessary air turbulence at the cleanroom boundary.Programmable acceleration, travel speed and hold-open time adapt movement to the traffic pattern.

A closing leaf can contact people or carts in the opening.Presence and anti-pinch sensors monitor the travel zone and command safe reversal.

Drive faults make a concealed operator difficult to service.A removable overhead cover exposes the motor, belt and controller from the room side.

Permohonan yang biasa

Pharmaceutical personnel routesHospital clean areasTouchless laboratory entrancesElectronics production corridorsHigh-frequency cleanroom material flow

Parameter teknikal

Typical physical construction values for an automatic cleanroom sliding doorset are shown below.

Bahan Teras	Closed-cell rigid polyurethane foam
Ketebalan Panel	40-50 mm sliding door leaf
Lebar berkesan	750-1600 mm single-sliding clear opening
Panjang maksimum	2400 mm maximum leaf height
Keluli Menghadapi Ketebalan	0.8-1.0 mm powder-coated steel skins
Ketumpatan teras	40-45 kg/m³ polyurethane
Kekonduksian Terma	0.022-0.028 W/(m·K) typical polyurethane core range
Kemasan permukaan	Smooth powder-coated steel or brushed stainless steel
Jenis Bersatu	Motor-driven overhead rail with monitored safety edge and perimeter brush/EPDM seals
Penyesuaian	Terdapat berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi

Pilihan yang boleh didapati

Wave, foot or radar activationBattery backupBi-parting double leavesInterlock and access-control integration

Planning a Automatic Cleanroom Sliding Door specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami