Complete automatic cleanroom sliding door with overhead operator

クリーンルームのドア、窓およびインターロックシステム

A 自動クリーンルームのスライドドア

A motorised cleanroom sliding doorset with touchless activation, adjustable travel, safety monitoring and a smooth insulated leaf for high-frequency hands-free passage.

Touchless Automatic Operation
Brushless Motor Drive
Adjustable Opening and Closing
Monitored Safety Sensors

見積もりリクエスト製品案内

商品紹介

The Automatic Cleanroom Sliding Door adds a compact drive motor, controller and safety sensors to an overhead sliding leaf. Foot, elbow, wave or access-control signals open the door without hand contact, while the controller monitors position and regulates acceleration and closing speed. A polyurethane-cored steel leaf keeps moving mass controlled, and the accessible operator cover allows routine adjustment without disturbing the wall opening.

主要な特徴

Hands-free activation reduces handle contact during material and personnel movement.

Controlled acceleration limits air disturbance and mechanical shock at the end positions.

Safety presence detection reverses or holds the leaf when the opening is occupied.

A low-mass polyurethane-cored leaf reduces the drive load for frequent cycles.

Integrated status contacts support interlocks, access control and building monitoring.

お客様の製品に関する懸念事項

Automatic sliding doors must combine hands-free convenience with safe sensing, restrained air movement and accessible drive maintenance.

Operators carrying sterile materials cannot use a manual handle safely.Wave, foot or access-control activation opens the doorway without hand contact.

Fast leaf movement creates unnecessary air turbulence at the cleanroom boundary.Programmable acceleration, travel speed and hold-open time adapt movement to the traffic pattern.

A closing leaf can contact people or carts in the opening.Presence and anti-pinch sensors monitor the travel zone and command safe reversal.

Drive faults make a concealed operator difficult to service.A removable overhead cover exposes the motor, belt and controller from the room side.

典型的な用途

Pharmaceutical personnel routesHospital clean areasTouchless laboratory entrancesElectronics production corridorsHigh-frequency cleanroom material flow

技術的なパラメータ

Typical physical construction values for an automatic cleanroom sliding doorset are shown below.

コア材料	Closed-cell rigid polyurethane foam
パネルの厚さ	40-50 mm sliding door leaf
有効幅	750-1600 mm single-sliding clear opening
最大長さ	2400 mm maximum leaf height
鋼鉄の厚さを直面する	0.8-1.0 mm powder-coated steel skins
コア密度	40-45 kg/m³ polyurethane
熱伝導率	0.022-0.028 W/(m·K) typical polyurethane core range
表面仕上げ	Smooth powder-coated steel or brushed stainless steel
ジョイントタイプ	Motor-driven overhead rail with monitored safety edge and perimeter brush/EPDM seals
カスタマイズ	目的のアプリケーションおよび動作環境に基づいて利用可能

利用可能なオプション

Wave, foot or radar activationBattery backupBi-parting double leavesInterlock and access-control integration

Planning a Automatic Cleanroom Sliding Door specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する