İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Kurulum Aksesuarları
Oda Basıncı Test Port
A flush brushed-stainless wall port that provides a capped connection point for cleanroom differential-pressure verification and reference tubing.
- Flush Stainless Wall Plate
- Capped M5 Test Nipple
- Two-Screw Mounting Pattern
- Rear Pressure-Tube Connection
Ürün tanıtımı
The room pressure test port uses a slim rectangular stainless faceplate to bring a low-pressure reference line to an accessible cleanroom wall surface. A central threaded service nipple accepts a compatible portable manometer hose, while the rear fitting connects to the concealed pressure tube. The knurled closure stays attached to a dedicated chain anchor and seals the exposed test point between checks. Two vertically aligned mounting holes and a compressible backing gasket keep the plate stable and limit false readings caused by air movement from the wall cavity.
Ana Özellikler
A central M5 service nipple gives technicians a defined connection for compatible differential-pressure test tubing.
The knurled sealing cap closes the pressure opening between measurements and remains captured by a short stainless chain.
Two countersunk holes on the vertical centerline secure the plate without crowding the pressure fitting.
A single rear bulkhead connector provides a direct transition to the concealed reference tube without an exposed instrument body.
Müşteri Ürün Sorunları
Very small room pressure differences are easily distorted by wall-cavity drafts, contaminated tubing or an unsealed service connection.
Air leaking around a loose wall plate can bias the pressure reference at the pickup point.The two-screw faceplate compresses a compatible backing gasket against the finished wall surface.
An open test nipple can collect cleaning residue or become a persistent pressure leak.The close-fitting knurled cap seals the front connection and stays attached to its dedicated chain anchor.
Long, kinked or wet reference tubing slows response and produces unstable manometer readings.The direct rear fitting supports a short, correctly routed tube that can be inspected for blockage and condensation.
A service fitting mounted without anti-rotation support can loosen when test hoses are connected repeatedly.The rectangular plate and separated top-and-bottom fixings resist turning loads around the central nipple.
Tipik uygulamalar
Portable verification of cleanroom-to-corridor pressure differenceReference pressure pickup at isolation and protection roomsCommissioning checks for cleanroom pressure cascadesService access for remote differential-pressure transmitter tubingRoutine maintenance checks in laboratories and controlled production suites
Teknik parametreler
Typical construction and dimensional ranges for a stainless cleanroom wall pressure test port are listed below.
| Temel malzemeler | 316L stainless-steel faceplate, pressure nipple, cap and chain with a stainless or nickel-plated rear tube fitting |
|---|---|
| Panel kalınlığı | 25-120 mm compatible modular wall or ceiling panel thickness |
| Effective Width (Etkili Genişlik) | Approximately 70 mm nominal single-gang faceplate width |
| Maksimum uzunluk | Up to 120 mm overall faceplate length |
| Çelik yüz yüze kalınlığı | 1.0-1.5 mm nominal stainless faceplate thickness |
| Core Density (Çekirdek Yoğunluğu) | Approximately 7900-8000 kg/m³ for austenitic stainless-steel components |
| Termal İletkenlik | Approximately 14-16 W/(m·K) for 316L stainless steel |
| Yüzey bitirme | Fine-brushed and passivated natural stainless steel with smooth radiused plate edges |
| Ortak tip | Two-screw gasketed wall plate with central M5 front test nipple and coaxial rear pressure-tube connection |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
304 or 316L stainless-steel plate and hardwareAlternative front test-thread and hose-adapter sizesBarbed or positive-lock rear tubing connectionPanel-depth gland extension for thicker cleanroom wallsEPDM or silicone backing gasket and custom fixing-hole spacing
Planning a Room Pressure Test Port specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
