日本語
ドイツ人。
アラビア語：アラビア語
フランス語で
インドネシア語
日本語で。流れ
韓国語
マレー語
ポルトガル語
ロシア語
スペイン語
タイ語
トルコ語
ベトナム語
商品紹介
The room pressure test port uses a slim rectangular stainless faceplate to bring a low-pressure reference line to an accessible cleanroom wall surface. A central threaded service nipple accepts a compatible portable manometer hose, while the rear fitting connects to the concealed pressure tube. The knurled closure stays attached to a dedicated chain anchor and seals the exposed test point between checks. Two vertically aligned mounting holes and a compressible backing gasket keep the plate stable and limit false readings caused by air movement from the wall cavity.
主要な特徴
A central M5 service nipple gives technicians a defined connection for compatible differential-pressure test tubing.
The knurled sealing cap closes the pressure opening between measurements and remains captured by a short stainless chain.
Two countersunk holes on the vertical centerline secure the plate without crowding the pressure fitting.
A single rear bulkhead connector provides a direct transition to the concealed reference tube without an exposed instrument body.
お客様の製品に関する懸念事項
Very small room pressure differences are easily distorted by wall-cavity drafts, contaminated tubing or an unsealed service connection.
Air leaking around a loose wall plate can bias the pressure reference at the pickup point.The two-screw faceplate compresses a compatible backing gasket against the finished wall surface.
An open test nipple can collect cleaning residue or become a persistent pressure leak.The close-fitting knurled cap seals the front connection and stays attached to its dedicated chain anchor.
Long, kinked or wet reference tubing slows response and produces unstable manometer readings.The direct rear fitting supports a short, correctly routed tube that can be inspected for blockage and condensation.
A service fitting mounted without anti-rotation support can loosen when test hoses are connected repeatedly.The rectangular plate and separated top-and-bottom fixings resist turning loads around the central nipple.
典型的な用途
Portable verification of cleanroom-to-corridor pressure differenceReference pressure pickup at isolation and protection roomsCommissioning checks for cleanroom pressure cascadesService access for remote differential-pressure transmitter tubingRoutine maintenance checks in laboratories and controlled production suites
技術的なパラメータ
Typical construction and dimensional ranges for a stainless cleanroom wall pressure test port are listed below.
| コア材料 | 316L stainless-steel faceplate, pressure nipple, cap and chain with a stainless or nickel-plated rear tube fitting |
|---|---|
| パネルの厚さ | 25-120 mm compatible modular wall or ceiling panel thickness |
| 有効幅 | Approximately 70 mm nominal single-gang faceplate width |
| 最大長さ | Up to 120 mm overall faceplate length |
| 鋼鉄の厚さを直面する | 1.0-1.5 mm nominal stainless faceplate thickness |
| コア密度 | Approximately 7900-8000 kg/m³ for austenitic stainless-steel components |
| 熱伝導率 | 316L ステンレス鋼の場合、約 14 — 16 W / （ m · K ） |
| 表面仕上げ | Fine-brushed and passivated natural stainless steel with smooth radiused plate edges |
| ジョイントタイプ | Two-screw gasketed wall plate with central M5 front test nipple and coaxial rear pressure-tube connection |
| カスタマイズ | 意図したアプリケーションと動作環境に基づいて利用できます。 |
利用可能なオプション
304 or 316L stainless-steel plate and hardwareAlternative front test-thread and hose-adapter sizesBarbed or positive-lock rear tubing connectionPanel-depth gland extension for thicker cleanroom wallsEPDM or silicone backing gasket and custom fixing-hole spacing
Planning a Room Pressure Test Port specification?
寸法、設置条件、性能目標、必要な表面仕上げをお送りください。
