İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Malzeme Taşıma ve Depolama
Pass-Through Conveyor
A stainless conveyor pass-through chamber with interlocked gasketed doors, HEPA filtration and automated roller transfer.
- Interlocked transfer tunnel separates adjacent cleanliness zones
- Conveyorized path reduces manual handling during material transfer
- HEPA-filtered chamber supports controlled purge between door cycles
Ürün tanıtımı
This conveyorized pass-through combines a cleanable stainless tunnel, transparent access doors at opposite ends, a continuous roller bed and a top fan-filter module. The control system sequences doors and conveyor movement so the two zone openings are not exposed simultaneously.
Ana Özellikler
HEPA-filtered airflow supports chamber purge between cycles.
Integrated rollers move compatible trays without entering the tunnel.
Transparent doors provide load and chamber visibility.
Smooth internal panels reduce difficult-to-clean ledges.
Müşteri Ürün Sorunları
Frequent material passage can disrupt pressure separation and increase handling at the boundary between controlled areas.
Both rooms being exposed at onceThe control interlock permits only one access door to open.
Particles remaining after loadingA timed HEPA purge refreshes chamber air before the next door cycle.
Manual reaching into the transfer chamberThe roller conveyor advances compatible loads through the tunnel.
Poor cycle visibilityTransparent doors and status controls show chamber condition.
Tipik uygulamalar
Automated tray and container transfer between packaging, preparation, filling, inspection and controlled storage zones.
Teknik parametreler
Chamber length, conveyor height, door actuation, purge timing and roller drive are configured around the material flow and room pressure strategy. Sensors and programmable controls coordinate load detection with the interlock sequence.
| Temel malzemeler | Type 304 stainless steel tunnel, roller conveyor and H14 HEPA fan-filter module |
|---|---|
| Panel kalınlığı | 30–50 mm double-wall chamber sections |
| Effective Width (Etkili Genişlik) | 500–1000 mm clear transfer width |
| Maksimum uzunluk | Up to 2500 mm overall conveyorized module length |
| Çelik yüz yüze kalınlığı | 1,2-2.0 mm |
| Core Density (Çekirdek Yoğunluğu) | 7930 kg / m3 nominal paslanmaz çelik yoğunluğu |
| Termal İletkenlik | Oda sıcaklığında yaklaşık 16.2 W/(m·K) |
| Yüzey bitirme | Fine-brushed and passivated stainless steel with smooth internal panels |
| Ortak tip | Seam-welded tunnel with interlocked gasketed lift doors and modular sealed roller conveyor |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Powered or gravity rollers, vertical lift or swing doors, barcode tracking, purge timers, pressure monitoring, ESD configuration and custom conveyor interfaces.
Planning a Pass-Through Conveyor specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
