Conveyor pass-through chamber in complete stainless three-quarter view

クリーンルーム材料の取り扱い · 貯蔵

パススルーコンベヤー

A stainless conveyor pass-through chamber with interlocked gasketed doors, HEPA filtration and automated roller transfer.

Interlocked transfer tunnel separates adjacent cleanliness zones
Conveyorized path reduces manual handling during material transfer
HEPA-filtered chamber supports controlled purge between door cycles

見積もりリクエスト製品案内

商品紹介

This conveyorized pass-through combines a cleanable stainless tunnel, transparent access doors at opposite ends, a continuous roller bed and a top fan-filter module. The control system sequences doors and conveyor movement so the two zone openings are not exposed simultaneously.

主要な特徴

Door interlock prevents both transfer openings from being open together.

HEPA-filtered airflow supports chamber purge between cycles.

Integrated rollers move compatible trays without entering the tunnel.

Transparent doors provide load and chamber visibility.

Smooth internal panels reduce difficult-to-clean ledges.

お客様の製品に関する懸念事項

Frequent material passage can disrupt pressure separation and increase handling at the boundary between controlled areas.

Both rooms being exposed at onceThe control interlock permits only one access door to open.

Particles remaining after loadingA timed HEPA purge refreshes chamber air before the next door cycle.

Manual reaching into the transfer chamberThe roller conveyor advances compatible loads through the tunnel.

Poor cycle visibilityTransparent doors and status controls show chamber condition.

典型的な用途

Automated tray and container transfer between packaging, preparation, filling, inspection and controlled storage zones.

技術的なパラメータ

Chamber length, conveyor height, door actuation, purge timing and roller drive are configured around the material flow and room pressure strategy. Sensors and programmable controls coordinate load detection with the interlock sequence.

コア材料	Type 304 stainless steel tunnel, roller conveyor and H14 HEPA fan-filter module
パネルの厚さ	30–50 mm double-wall chamber sections
有効幅	500–1000 mm clear transfer width
最大長さ	Up to 2500 mm overall conveyorized module length
鋼鉄の厚さを直面する	1.2 — 2.0 mm
コア密度	7930 kg / m3 公称ステンレス鋼密度
熱伝導率	室温で約 16.2 W / （ m · K ）
表面仕上げ	Fine-brushed and passivated stainless steel with smooth internal panels
ジョイントタイプ	Seam-welded tunnel with interlocked gasketed lift doors and modular sealed roller conveyor
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Powered or gravity rollers, vertical lift or swing doors, barcode tracking, purge timers, pressure monitoring, ESD configuration and custom conveyor interfaces.

Planning a Pass-Through Conveyor specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する