Conveyor pass-through chamber in complete stainless three-quarter view

클린룸 재료 취급 및 보관

패스스루 컨베이어

A stainless conveyor pass-through chamber with interlocked gasketed doors, HEPA filtration and automated roller transfer.

Interlocked transfer tunnel separates adjacent cleanliness zones
Conveyorized path reduces manual handling during material transfer
HEPA-filtered chamber supports controlled purge between door cycles

견적 요청 제품 찾아보기

상품 소개

This conveyorized pass-through combines a cleanable stainless tunnel, transparent access doors at opposite ends, a continuous roller bed and a top fan-filter module. The control system sequences doors and conveyor movement so the two zone openings are not exposed simultaneously.

주요 기능

Door interlock prevents both transfer openings from being open together.

HEPA-filtered airflow supports chamber purge between cycles.

Integrated rollers move compatible trays without entering the tunnel.

Transparent doors provide load and chamber visibility.

Smooth internal panels reduce difficult-to-clean ledges.

고객 제품 관심사

Frequent material passage can disrupt pressure separation and increase handling at the boundary between controlled areas.

Both rooms being exposed at onceThe control interlock permits only one access door to open.

Particles remaining after loadingA timed HEPA purge refreshes chamber air before the next door cycle.

Manual reaching into the transfer chamberThe roller conveyor advances compatible loads through the tunnel.

Poor cycle visibilityTransparent doors and status controls show chamber condition.

일반적인 응용 프로그램

Automated tray and container transfer between packaging, preparation, filling, inspection and controlled storage zones.

기술 매개변수

Chamber length, conveyor height, door actuation, purge timing and roller drive are configured around the material flow and room pressure strategy. Sensors and programmable controls coordinate load detection with the interlock sequence.

핵심 재료	Type 304 stainless steel tunnel, roller conveyor and H14 HEPA fan-filter module
패널 두께	30–50 mm double-wall chamber sections
유효 폭	500–1000 mm clear transfer width
최대 길이	Up to 2500 mm overall conveyorized module length
강철 면면 두께	1. 2 - 2. 0 cm
코어 밀도	7930 kg / m 3 공칭 스테인레스 강철 밀도
열전도도 (Thermal Conductivity)	실온에서 약 16. 2 W / (m · K)
표면 마무리	Fine-brushed and passivated stainless steel with smooth internal panels
접합 유형	Seam-welded tunnel with interlocked gasketed lift doors and modular sealed roller conveyor
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Powered or gravity rollers, vertical lift or swing doors, barcode tracking, purge timers, pressure monitoring, ESD configuration and custom conveyor interfaces.

Planning a Pass-Through Conveyor specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.