Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Manejo y almacenamiento de materiales de sala limpia
Paso a través del transportador
A stainless conveyor pass-through chamber with interlocked gasketed doors, HEPA filtration and automated roller transfer.
- Interlocked transfer tunnel separates adjacent cleanliness zones
- Conveyorized path reduces manual handling during material transfer
- HEPA-filtered chamber supports controlled purge between door cycles
Introducción del producto
This conveyorized pass-through combines a cleanable stainless tunnel, transparent access doors at opposite ends, a continuous roller bed and a top fan-filter module. The control system sequences doors and conveyor movement so the two zone openings are not exposed simultaneously.
Características clave
HEPA-filtered airflow supports chamber purge between cycles.
Integrated rollers move compatible trays without entering the tunnel.
Transparent doors provide load and chamber visibility.
Smooth internal panels reduce difficult-to-clean ledges.
Preocupaciones del producto del cliente
Frequent material passage can disrupt pressure separation and increase handling at the boundary between controlled areas.
Both rooms being exposed at onceThe control interlock permits only one access door to open.
Particles remaining after loadingA timed HEPA purge refreshes chamber air before the next door cycle.
Manual reaching into the transfer chamberThe roller conveyor advances compatible loads through the tunnel.
Poor cycle visibilityTransparent doors and status controls show chamber condition.
Aplicaciones típicas
Automated tray and container transfer between packaging, preparation, filling, inspection and controlled storage zones.
Parámetros técnicos
Chamber length, conveyor height, door actuation, purge timing and roller drive are configured around the material flow and room pressure strategy. Sensors and programmable controls coordinate load detection with the interlock sequence.
| Materiales Core | Type 304 stainless steel tunnel, roller conveyor and H14 HEPA fan-filter module |
|---|---|
| Panel de espesor | 30–50 mm double-wall chamber sections |
| Ancho efectivo | 500–1000 mm clear transfer width |
| Longitud máxima | Up to 2500 mm overall conveyorized module length |
| Acero frente a espesor | 1,2 - 2,0 mm por |
| Densidad Core | 7930 kg / m3 Densidad nominal de acero inoxidable |
| Conductividad térmica | 16.2 W / (m · K) a temperatura ambiente. |
| Superficie acabada | Fine-brushed and passivated stainless steel with smooth internal panels |
| Tipo conjunto | Seam-welded tunnel with interlocked gasketed lift doors and modular sealed roller conveyor |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Powered or gravity rollers, vertical lift or swing doors, barcode tracking, purge timers, pressure monitoring, ESD configuration and custom conveyor interfaces.
Planning a Pass-Through Conveyor specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
