İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Kontrolü ve Çevre İzleme Sistemleri
Temiz Oda PLC Kontrol Sistemi
A deterministic PLC automation panel for cleanroom HVAC sequences, fast equipment interlocks, room-control loops and industrial field communication.
- Deterministic PLC Logic
- Modular Industrial I/O
- Hardwired Safety Interlocks
- Networked Equipment Control
Ürün tanıtımı
The PLC cabinet concentrates power distribution, controller hardware, isolated I/O and communication modules for cleanroom plant equipment. Control routines execute locally for fans, dampers, valves, pumps, terminal units and room-pressure sequences even when a supervisory workstation is unavailable. Hardwired permissives and emergency contacts remain separate from ordinary software commands. Modular terminals and labeled wiring ducts provide service access without disturbing adjacent control circuits.
Ana Özellikler
Modular digital, analog and network I/O accommodates both conventional and intelligent field devices.
Dedicated interlock circuits protect fans, heaters and pressure-critical equipment states.
Separated power and signal wiring reduces electrical noise in low-level sensor channels.
Müşteri Ürün Sorunları
Cleanroom PLC hardware must combine dependable real-time logic with wiring clarity and maintainable separation between control and power circuits.
Loss of the operator workstation stops environmental control.The PLC retains all local sequences, setpoints and interlocks without supervisory dependence.
Mixed high-voltage and sensor wiring introduces unstable readings.Partitioned wiring ducts, shield terminals and isolated analog modules separate signal classes.
Expansion requires replacing the complete control panel.Spare rail space and modular remote I/O allow additional cleanroom points to be added.
Troubleshooting is slowed by unidentified field wiring.Numbered terminals, ferrules and device labels correspond directly with controller I/O schedules.
Tipik uygulamalar
AHU automation panelsCleanroom utility skidsPressure-control plant roomsProcess equipment interlocking
Teknik parametreler
Typical construction values for a cleanroom PLC control cabinet are listed below.
| Temel malzemeler | Powder-coated steel cabinet with FR-4 PLC modules, copper busbars and flame-retardant wiring ducts |
|---|---|
| Panel kalınlığı | 250-500 mm enclosure depth |
| Effective Width (Etkili Genişlik) | 600-1400 mm panel width |
| Maksimum uzunluk | Up to 2200 mm cabinet height |
| Çelik yüz yüze kalınlığı | 1.5-2.0 mm powder-coated steel enclosure |
| Core Density (Çekirdek Yoğunluğu) | 7800-8050 kg/m³ for steel structural components |
| Termal İletkenlik | 45-60 W/(m·K) for the steel enclosure |
| Yüzey bitirme | Light-gray textured powder coating with laser-engraved device labels |
| Ortak tip | DIN-rail modular assembly with segregated power, I/O and communication terminal zones |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Redundant PLC processorsHot-swappable remote I/OTouchscreen operator panelManaged industrial Ethernet switch
Planning a Cleanroom PLC Control System specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
