Complete cleanroom PLC control cabinet with touchscreen in three-quarter view

クリーンルーム管理 · 環境モニタリングシステム

クリーンルーム PLC 制御システム

A deterministic PLC automation panel for cleanroom HVAC sequences, fast equipment interlocks, room-control loops and industrial field communication.

Deterministic PLC Logic
Modular Industrial I/O
Hardwired Safety Interlocks
Networked Equipment Control

見積もりリクエスト製品案内

商品紹介

The PLC cabinet concentrates power distribution, controller hardware, isolated I/O and communication modules for cleanroom plant equipment. Control routines execute locally for fans, dampers, valves, pumps, terminal units and room-pressure sequences even when a supervisory workstation is unavailable. Hardwired permissives and emergency contacts remain separate from ordinary software commands. Modular terminals and labeled wiring ducts provide service access without disturbing adjacent control circuits.

主要な特徴

Scan-based control executes repeatable HVAC sequences independently of the supervisory computer.

Modular digital, analog and network I/O accommodates both conventional and intelligent field devices.

Dedicated interlock circuits protect fans, heaters and pressure-critical equipment states.

Separated power and signal wiring reduces electrical noise in low-level sensor channels.

お客様の製品に関する懸念事項

Cleanroom PLC hardware must combine dependable real-time logic with wiring clarity and maintainable separation between control and power circuits.

Loss of the operator workstation stops environmental control.The PLC retains all local sequences, setpoints and interlocks without supervisory dependence.

Mixed high-voltage and sensor wiring introduces unstable readings.Partitioned wiring ducts, shield terminals and isolated analog modules separate signal classes.

Expansion requires replacing the complete control panel.Spare rail space and modular remote I/O allow additional cleanroom points to be added.

Troubleshooting is slowed by unidentified field wiring.Numbered terminals, ferrules and device labels correspond directly with controller I/O schedules.

典型的な用途

AHU automation panelsCleanroom utility skidsPressure-control plant roomsProcess equipment interlocking

技術的なパラメータ

Typical construction values for a cleanroom PLC control cabinet are listed below.

コア材料	Powder-coated steel cabinet with FR-4 PLC modules, copper busbars and flame-retardant wiring ducts
パネルの厚さ	250-500 mm enclosure depth
有効幅	600-1400 mm panel width
最大長さ	最大 2200 mm キャビネット高さ
鋼鉄の厚さを直面する	1.5-2.0 mm powder-coated steel enclosure
コア密度	7800-8050 kg/m³ for steel structural components
熱伝導率	45-60 W/(m·K) for the steel enclosure
表面仕上げ	Light-gray textured powder coating with laser-engraved device labels
ジョイントタイプ	DIN-rail modular assembly with segregated power, I/O and communication terminal zones
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Redundant PLC processorsHot-swappable remote I/OTouchscreen operator panelManaged industrial Ethernet switch

Planning a Cleanroom PLC Control System specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する