English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Системы контроля за чистыми помещениями и экологического мониторинга
Система управления PLC в чистых помещениях
A deterministic PLC automation panel for cleanroom HVAC sequences, fast equipment interlocks, room-control loops and industrial field communication.
- Deterministic PLC Logic
- Modular Industrial I/O
- Hardwired Safety Interlocks
- Networked Equipment Control
Введение продукции
The PLC cabinet concentrates power distribution, controller hardware, isolated I/O and communication modules for cleanroom plant equipment. Control routines execute locally for fans, dampers, valves, pumps, terminal units and room-pressure sequences even when a supervisory workstation is unavailable. Hardwired permissives and emergency contacts remain separate from ordinary software commands. Modular terminals and labeled wiring ducts provide service access without disturbing adjacent control circuits.
Основные характеристики
Modular digital, analog and network I/O accommodates both conventional and intelligent field devices.
Dedicated interlock circuits protect fans, heaters and pressure-critical equipment states.
Separated power and signal wiring reduces electrical noise in low-level sensor channels.
Обеспокоенность клиентов продуктами
Cleanroom PLC hardware must combine dependable real-time logic with wiring clarity and maintainable separation between control and power circuits.
Loss of the operator workstation stops environmental control.The PLC retains all local sequences, setpoints and interlocks without supervisory dependence.
Mixed high-voltage and sensor wiring introduces unstable readings.Partitioned wiring ducts, shield terminals and isolated analog modules separate signal classes.
Expansion requires replacing the complete control panel.Spare rail space and modular remote I/O allow additional cleanroom points to be added.
Troubleshooting is slowed by unidentified field wiring.Numbered terminals, ferrules and device labels correspond directly with controller I/O schedules.
Типичные приложения
AHU automation panelsCleanroom utility skidsPressure-control plant roomsProcess equipment interlocking
Технические параметры
Typical construction values for a cleanroom PLC control cabinet are listed below.
| Основной материал | Powder-coated steel cabinet with FR-4 PLC modules, copper busbars and flame-retardant wiring ducts |
|---|---|
| Толщина панели | 250-500 mm enclosure depth |
| эффективная ширина | 600-1400 mm panel width |
| Максимальная длина | До 2200 мм высота шкафа |
| Толщина линий стали | 1.5-2.0 mm powder-coated steel enclosure |
| Плотность ядра | 7800-8050 kg/m³ for steel structural components |
| Теплопроводимость | 45-60 W/(m·K) for the steel enclosure |
| Поверхностная отделка | Light-gray textured powder coating with laser-engraved device labels |
| Объединенный тип | DIN-rail modular assembly with segregated power, I/O and communication terminal zones |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Redundant PLC processorsHot-swappable remote I/OTouchscreen operator panelManaged industrial Ethernet switch
Planning a Cleanroom PLC Control System specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
