İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Kurulum Aksesuarları
Temiz Oda Penetration Boot
A flanged EPDM bellows boot that forms a flexible, cleanable transition around pipes or conduits passing through cleanroom partitions.
- Flexible Bellows Neck
- Four-Bolt Square Flange
- Movement-Tolerant Seal
- Replaceable EPDM Assembly
Ürün tanıtımı
The boot combines a molded EPDM accordion neck with a rigid square double-flange base and four stainless corner fasteners. Its circular neck grips a compatible service while the convolutions accommodate limited movement.
Ana Özellikler
A square double-flange base distributes clamping pressure.
Four stainless fasteners provide balanced retention.
Smooth molded EPDM supports routine wiping.
Müşteri Ürün Sorunları
Rigidly sealed services can crack when movement shifts the pipe relative to the partition.
Movement stresses rigid sealant.The accordion neck flexes while maintaining contact.
Cutouts leave untidy edges.The broad flange covers the opening perimeter.
Uneven clamping leaves gaps.Four fasteners distribute retention.
Potting complicates service changes.The bolted assembly can be replaced.
Tipik uygulamalar
Cleanroom pipe penetrationsElectrical conduit transitionsEquipment utility connectionsFlexible service entries
Teknik parametreler
Typical construction ranges for a flanged EPDM cleanroom penetration boot are listed below.
| Temel malzemeler | Molded black EPDM bellows with rigid clamping flanges |
|---|---|
| Panel kalınlığı | 40-150 mm compatible partition thickness |
| Effective Width (Etkili Genişlik) | 25-200 mm compatible service diameter |
| Maksimum uzunluk | Up to 450 mm overall flange dimension |
| Çelik yüz yüze kalınlığı | 1.00-3.00 mm optional stainless plate thickness |
| Core Density (Çekirdek Yoğunluğu) | Approximately 1100-1300 kg/m³ for EPDM |
| Termal İletkenlik | Approximately 0.20-0.30 W/(m·K) for EPDM |
| Yüzey bitirme | Matte black elastomer with satin stainless fasteners |
| Ortak tip | Four-point bolted flange with flexible compression fit |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
EPDM or silicone elastomerMultiple neck diametersSplit retrofit constructionPolymer or stainless flanges
Planning a Cleanroom Penetration Boot specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
