Three-quarter view of a black EPDM cleanroom penetration boot

Аксессуары для установки в чистых помещениях

Boot Cleanroom Penetration

A flanged EPDM bellows boot that forms a flexible, cleanable transition around pipes or conduits passing through cleanroom partitions.

Flexible Bellows Neck
Four-Bolt Square Flange
Movement-Tolerant Seal
Replaceable EPDM Assembly

Запрос котировки Просмотреть продукты

Введение продукции

The boot combines a molded EPDM accordion neck with a rigid square double-flange base and four stainless corner fasteners. Its circular neck grips a compatible service while the convolutions accommodate limited movement.

Основные характеристики

Accordion convolutions accommodate limited service movement.

A square double-flange base distributes clamping pressure.

Four stainless fasteners provide balanced retention.

Smooth molded EPDM supports routine wiping.

Обеспокоенность клиентов продуктами

Rigidly sealed services can crack when movement shifts the pipe relative to the partition.

Movement stresses rigid sealant.The accordion neck flexes while maintaining contact.

Cutouts leave untidy edges.The broad flange covers the opening perimeter.

Uneven clamping leaves gaps.Four fasteners distribute retention.

Potting complicates service changes.The bolted assembly can be replaced.

Типичные приложения

Cleanroom pipe penetrationsElectrical conduit transitionsEquipment utility connectionsFlexible service entries

Технические параметры

Typical construction ranges for a flanged EPDM cleanroom penetration boot are listed below.

Основной материал	Molded black EPDM bellows with rigid clamping flanges
Толщина панели	40-150 mm compatible partition thickness
эффективная ширина	25-200 mm compatible service diameter
Максимальная длина	Up to 450 mm overall flange dimension
Толщина линий стали	1.00-3.00 mm optional stainless plate thickness
Плотность ядра	Approximately 1100-1300 kg/m³ for EPDM
Теплопроводимость	Approximately 0.20-0.30 W/(m·K) for EPDM
Поверхностная отделка	Matte black elastomer with satin stainless fasteners
Объединенный тип	Four-point bolted flange with flexible compression fit
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

EPDM or silicone elastomerMultiple neck diametersSplit retrofit constructionPolymer or stainless flanges

Planning a Cleanroom Penetration Boot specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой