Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Accesorios de instalación de sala limpia
Boot de penetración de sala limpia
A flanged EPDM bellows boot that forms a flexible, cleanable transition around pipes or conduits passing through cleanroom partitions.
- Flexible Bellows Neck
- Four-Bolt Square Flange
- Movement-Tolerant Seal
- Replaceable EPDM Assembly
Introducción del producto
The boot combines a molded EPDM accordion neck with a rigid square double-flange base and four stainless corner fasteners. Its circular neck grips a compatible service while the convolutions accommodate limited movement.
Características clave
A square double-flange base distributes clamping pressure.
Four stainless fasteners provide balanced retention.
Smooth molded EPDM supports routine wiping.
Preocupaciones del producto del cliente
Rigidly sealed services can crack when movement shifts the pipe relative to the partition.
Movement stresses rigid sealant.The accordion neck flexes while maintaining contact.
Cutouts leave untidy edges.The broad flange covers the opening perimeter.
Uneven clamping leaves gaps.Four fasteners distribute retention.
Potting complicates service changes.The bolted assembly can be replaced.
Aplicaciones típicas
Cleanroom pipe penetrationsElectrical conduit transitionsEquipment utility connectionsFlexible service entries
Parámetros técnicos
Typical construction ranges for a flanged EPDM cleanroom penetration boot are listed below.
| Materiales Core | Molded black EPDM bellows with rigid clamping flanges |
|---|---|
| Panel de espesor | 40-150 mm compatible partition thickness |
| Ancho efectivo | 25-200 mm compatible service diameter |
| Longitud máxima | Up to 450 mm overall flange dimension |
| Acero frente a espesor | 1.00-3.00 mm optional stainless plate thickness |
| Densidad Core | Approximately 1100-1300 kg/m³ for EPDM |
| Conductividad térmica | Approximately 0.20-0.30 W/(m·K) for EPDM |
| Superficie acabada | Matte black elastomer with satin stainless fasteners |
| Tipo conjunto | Four-point bolted flange with flexible compression fit |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
EPDM or silicone elastomerMultiple neck diametersSplit retrofit constructionPolymer or stainless flanges
Planning a Cleanroom Penetration Boot specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
