Three-quarter view of a black EPDM cleanroom penetration boot

クリーンルームの設置付属品

クリーンルーム浸透ブーツ

A flanged EPDM bellows boot that forms a flexible, cleanable transition around pipes or conduits passing through cleanroom partitions.

Flexible Bellows Neck
Four-Bolt Square Flange
Movement-Tolerant Seal
Replaceable EPDM Assembly

見積もりリクエスト製品案内

商品紹介

The boot combines a molded EPDM accordion neck with a rigid square double-flange base and four stainless corner fasteners. Its circular neck grips a compatible service while the convolutions accommodate limited movement.

主要な特徴

Accordion convolutions accommodate limited service movement.

A square double-flange base distributes clamping pressure.

Four stainless fasteners provide balanced retention.

Smooth molded EPDM supports routine wiping.

お客様の製品に関する懸念事項

Rigidly sealed services can crack when movement shifts the pipe relative to the partition.

Movement stresses rigid sealant.The accordion neck flexes while maintaining contact.

Cutouts leave untidy edges.The broad flange covers the opening perimeter.

Uneven clamping leaves gaps.Four fasteners distribute retention.

Potting complicates service changes.The bolted assembly can be replaced.

典型的な用途

Cleanroom pipe penetrationsElectrical conduit transitionsEquipment utility connectionsFlexible service entries

技術的なパラメータ

Typical construction ranges for a flanged EPDM cleanroom penetration boot are listed below.

コア材料	Molded black EPDM bellows with rigid clamping flanges
パネルの厚さ	40-150 mm compatible partition thickness
有効幅	25-200 mm compatible service diameter
最大長さ	Up to 450 mm overall flange dimension
鋼鉄の厚さを直面する	1.00-3.00 mm optional stainless plate thickness
コア密度	Approximately 1100-1300 kg/m³ for EPDM
熱伝導率	Approximately 0.20-0.30 W/(m·K) for EPDM
表面仕上げ	Matte black elastomer with satin stainless fasteners
ジョイントタイプ	Four-point bolted flange with flexible compression fit
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

EPDM or silicone elastomerMultiple neck diametersSplit retrofit constructionPolymer or stainless flanges

Planning a Cleanroom Penetration Boot specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する