İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Kurulum Aksesuarları
Kimyasal Anchor
A two-component injection resin system that bonds threaded rods into drilled concrete or masonry holes for cleanroom support fixings.
- Two-Part Resin
- Static Mixing Nozzle
- Stress-Distributed Bond
- Flexible Embedment Depth
Ürün tanıtımı
The chemical anchor uses a dual-chamber cartridge to keep resin and hardener separate until extrusion through a static mixer. The blended compound fills the cleaned drilled hole and bonds around a zinc-plated or stainless threaded rod, transferring load through the embedment without an expansion wedge. This makes it useful for cleanroom ceiling hangers, frames and service supports where edge distance, substrate condition or fixing layout favors a bonded connection.
Ana Özellikler
Bonded anchorage transfers force along the embedment rather than creating concentrated expansion pressure.
Threaded-rod diameter and embedment can be selected for the substrate and support detail.
Cartridge dispensing allows controlled filling of horizontal, vertical or overhead drilled holes with the appropriate formulation.
Müşteri Ürün Sorunları
Cleanroom support hardware often needs a durable threaded fixing where expansion force, irregular holes or limited edge distance complicate mechanical anchoring.
Expansion anchors can introduce high radial stress near a concrete edge.Bonded resin develops adhesion along the embedment without relying on a driven expansion wedge.
Dust left in the drilled hole weakens adhesive contact.Specified blow-brush-blow cleaning prepares the hole before controlled resin injection.
Unmixed resin creates soft zones around the threaded rod.The static mixer combines both cartridge components; the initial discharge is discarded until the color is uniform.
Incorrect embedment wastes resin or reduces anchorage capacity.Hole diameter, depth, rod size and resin volume are matched to the fixing design and substrate.
Tipik uygulamalar
Cleanroom ceiling hanger anchorsWall-frame support fixingsService support channelsEquipment restraint bracketsConcrete and solid-masonry anchorage
Teknik parametreler
Typical component and installation ranges for a two-part injection chemical anchor system are listed below.
| Temel malzemeler | Two-component vinylester, epoxy-acrylate or epoxy anchoring resin with threaded steel rod |
|---|---|
| Panel kalınlığı | 40-150 mm compatible cleanroom panel or support-zone thickness |
| Effective Width (Etkili Genişlik) | 8-30 mm typical drilled-hole diameter |
| Maksimum uzunluk | Up to 1000 mm threaded anchor-rod length |
| Çelik yüz yüze kalınlığı | 1.50-8.00 mm compatible support-bracket thickness |
| Core Density (Çekirdek Yoğunluğu) | Approximately 1400-1800 kg/m³ mixed resin density |
| Termal İletkenlik | Approximately 0.20-0.40 W/(m·K) for cured anchoring resin |
| Yüzey bitirme | White/red dual-chamber cartridge; zinc-plated or passivated stainless threaded hardware |
| Ortak tip | Resin-bonded threaded-rod embedment in cleaned drilled concrete or masonry |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Vinylester or epoxy resin chemistryZinc-plated or stainless threaded rodMultiple cartridge volumesStandard or extended static mixer
Planning a Chemical Anchor specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
