영어
독일어
아랍어
프랑스어
인도네시아어
일본어
한국어현재 Current
말레이어
포르투갈어
러시아어
스페인어
태국어
터키어
베트남어
상품 소개
The chemical anchor uses a dual-chamber cartridge to keep resin and hardener separate until extrusion through a static mixer. The blended compound fills the cleaned drilled hole and bonds around a zinc-plated or stainless threaded rod, transferring load through the embedment without an expansion wedge. This makes it useful for cleanroom ceiling hangers, frames and service supports where edge distance, substrate condition or fixing layout favors a bonded connection.
주요 기능
Bonded anchorage transfers force along the embedment rather than creating concentrated expansion pressure.
Threaded-rod diameter and embedment can be selected for the substrate and support detail.
Cartridge dispensing allows controlled filling of horizontal, vertical or overhead drilled holes with the appropriate formulation.
고객 제품 관심사
Cleanroom support hardware often needs a durable threaded fixing where expansion force, irregular holes or limited edge distance complicate mechanical anchoring.
Expansion anchors can introduce high radial stress near a concrete edge.Bonded resin develops adhesion along the embedment without relying on a driven expansion wedge.
Dust left in the drilled hole weakens adhesive contact.Specified blow-brush-blow cleaning prepares the hole before controlled resin injection.
Unmixed resin creates soft zones around the threaded rod.The static mixer combines both cartridge components; the initial discharge is discarded until the color is uniform.
Incorrect embedment wastes resin or reduces anchorage capacity.Hole diameter, depth, rod size and resin volume are matched to the fixing design and substrate.
일반적인 응용 프로그램
Cleanroom ceiling hanger anchorsWall-frame support fixingsService support channelsEquipment restraint bracketsConcrete and solid-masonry anchorage
기술 매개변수
Typical component and installation ranges for a two-part injection chemical anchor system are listed below.
| 핵심 재료 | Two-component vinylester, epoxy-acrylate or epoxy anchoring resin with threaded steel rod |
|---|---|
| 패널 두께 | 40-150 mm compatible cleanroom panel or support-zone thickness |
| 유효 폭 | 8-30 mm typical drilled-hole diameter |
| 최대 길이 | Up to 1000 mm threaded anchor-rod length |
| 강철 면면 두께 | 1.50-8.00 mm compatible support-bracket thickness |
| 코어 밀도 | Approximately 1400-1800 kg/m³ mixed resin density |
| 열전도도 (Thermal Conductivity) | Approximately 0.20-0.40 W/(m·K) for cured anchoring resin |
| 표면 마무리 | White/red dual-chamber cartridge; zinc-plated or passivated stainless threaded hardware |
| 접합 유형 | Resin-bonded threaded-rod embedment in cleaned drilled concrete or masonry |
| 사용자 정의 | 의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다. |
사용 가능한 옵션
Vinylester or epoxy resin chemistryZinc-plated or stainless threaded rodMultiple cartridge volumesStandard or extended static mixer
Planning a Chemical Anchor specification?
치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.
