日本語
ドイツ人。
アラビア語：アラビア語
フランス語で
インドネシア語
日本語で。流れ
韓国語
マレー語
ポルトガル語
ロシア語
スペイン語
タイ語
トルコ語
ベトナム語
商品紹介
The chemical anchor uses a dual-chamber cartridge to keep resin and hardener separate until extrusion through a static mixer. The blended compound fills the cleaned drilled hole and bonds around a zinc-plated or stainless threaded rod, transferring load through the embedment without an expansion wedge. This makes it useful for cleanroom ceiling hangers, frames and service supports where edge distance, substrate condition or fixing layout favors a bonded connection.
主要な特徴
Bonded anchorage transfers force along the embedment rather than creating concentrated expansion pressure.
Threaded-rod diameter and embedment can be selected for the substrate and support detail.
Cartridge dispensing allows controlled filling of horizontal, vertical or overhead drilled holes with the appropriate formulation.
お客様の製品に関する懸念事項
Cleanroom support hardware often needs a durable threaded fixing where expansion force, irregular holes or limited edge distance complicate mechanical anchoring.
Expansion anchors can introduce high radial stress near a concrete edge.Bonded resin develops adhesion along the embedment without relying on a driven expansion wedge.
Dust left in the drilled hole weakens adhesive contact.Specified blow-brush-blow cleaning prepares the hole before controlled resin injection.
Unmixed resin creates soft zones around the threaded rod.The static mixer combines both cartridge components; the initial discharge is discarded until the color is uniform.
Incorrect embedment wastes resin or reduces anchorage capacity.Hole diameter, depth, rod size and resin volume are matched to the fixing design and substrate.
典型的な用途
Cleanroom ceiling hanger anchorsWall-frame support fixingsService support channelsEquipment restraint bracketsConcrete and solid-masonry anchorage
技術的なパラメータ
Typical component and installation ranges for a two-part injection chemical anchor system are listed below.
| コア材料 | Two-component vinylester, epoxy-acrylate or epoxy anchoring resin with threaded steel rod |
|---|---|
| パネルの厚さ | 40-150 mm compatible cleanroom panel or support-zone thickness |
| 有効幅 | 8-30 mm typical drilled-hole diameter |
| 最大長さ | Up to 1000 mm threaded anchor-rod length |
| 鋼鉄の厚さを直面する | 1.50-8.00 mm compatible support-bracket thickness |
| コア密度 | Approximately 1400-1800 kg/m³ mixed resin density |
| 熱伝導率 | Approximately 0.20-0.40 W/(m·K) for cured anchoring resin |
| 表面仕上げ | White/red dual-chamber cartridge; zinc-plated or passivated stainless threaded hardware |
| ジョイントタイプ | Resin-bonded threaded-rod embedment in cleaned drilled concrete or masonry |
| カスタマイズ | 意図したアプリケーションと動作環境に基づいて利用できます。 |
利用可能なオプション
Vinylester or epoxy resin chemistryZinc-plated or stainless threaded rodMultiple cartridge volumesStandard or extended static mixer
Planning a Chemical Anchor specification?
寸法、設置条件、性能目標、必要な表面仕上げをお送りください。
