Three-quarter view of a dual-chamber chemical anchor cartridge and threaded rod

Aksesori Pemasangan Bilik Bersih

Anchor Kimia

A two-component injection resin system that bonds threaded rods into drilled concrete or masonry holes for cleanroom support fixings.

Two-Part Resin
Static Mixing Nozzle
Stress-Distributed Bond
Flexible Embedment Depth

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The chemical anchor uses a dual-chamber cartridge to keep resin and hardener separate until extrusion through a static mixer. The blended compound fills the cleaned drilled hole and bonds around a zinc-plated or stainless threaded rod, transferring load through the embedment without an expansion wedge. This makes it useful for cleanroom ceiling hangers, frames and service supports where edge distance, substrate condition or fixing layout favors a bonded connection.

Ciri-ciri Utama

A dual-chamber cartridge meters resin and hardener through a replaceable static mixer.

Bonded anchorage transfers force along the embedment rather than creating concentrated expansion pressure.

Threaded-rod diameter and embedment can be selected for the substrate and support detail.

Cartridge dispensing allows controlled filling of horizontal, vertical or overhead drilled holes with the appropriate formulation.

Kebimbangan Produk Pelanggan

Cleanroom support hardware often needs a durable threaded fixing where expansion force, irregular holes or limited edge distance complicate mechanical anchoring.

Expansion anchors can introduce high radial stress near a concrete edge.Bonded resin develops adhesion along the embedment without relying on a driven expansion wedge.

Dust left in the drilled hole weakens adhesive contact.Specified blow-brush-blow cleaning prepares the hole before controlled resin injection.

Unmixed resin creates soft zones around the threaded rod.The static mixer combines both cartridge components; the initial discharge is discarded until the color is uniform.

Incorrect embedment wastes resin or reduces anchorage capacity.Hole diameter, depth, rod size and resin volume are matched to the fixing design and substrate.

Permohonan yang biasa

Cleanroom ceiling hanger anchorsWall-frame support fixingsService support channelsEquipment restraint bracketsConcrete and solid-masonry anchorage

Parameter teknikal

Typical component and installation ranges for a two-part injection chemical anchor system are listed below.

Bahan Teras	Two-component vinylester, epoxy-acrylate or epoxy anchoring resin with threaded steel rod
Ketebalan Panel	40-150 mm compatible cleanroom panel or support-zone thickness
Lebar berkesan	8-30 mm typical drilled-hole diameter
Panjang maksimum	Up to 1000 mm threaded anchor-rod length
Keluli Menghadapi Ketebalan	1.50-8.00 mm compatible support-bracket thickness
Ketumpatan teras	Approximately 1400-1800 kg/m³ mixed resin density
Kekonduksian Terma	Approximately 0.20-0.40 W/(m·K) for cured anchoring resin
Kemasan permukaan	White/red dual-chamber cartridge; zinc-plated or passivated stainless threaded hardware
Jenis Bersatu	Resin-bonded threaded-rod embedment in cleaned drilled concrete or masonry
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Vinylester or epoxy resin chemistryZinc-plated or stainless threaded rodMultiple cartridge volumesStandard or extended static mixer

Planning a Chemical Anchor specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami