Temiz Oda Ekipmanları ve Aseptik Tesis Temelleri için Tek Duraklı TedarikçinizUluslararası Proje Destekleri
Open mobile navigationClose mobile navigation
Temiz Oda Kapıları, Pencereler ve Kilitleme Sistemleri

Hava geçirmez temizlik odası Swing Kapı

A pressure-control swing doorset with a rigid insulated leaf, continuous EPDM frame seals and a concealed automatic bottom seal that closes the threshold gap.
  • Four-Side Sealing Strategy
  • Automatic Bottom Drop Seal
  • Rigid Insulated Leaf
  • Threshold-Free Passage
Alıntı isteği Browse ürünleri

Ürün tanıtımı

The Airtight Cleanroom Swing Door controls leakage through the doorway by combining accurate leaf-to-frame alignment with compressible seals along the head, jambs and threshold. The bottom seal retracts while the door moves and drops against the finished floor when closed. A stiff polyurethane-cored leaf keeps the gasket contact plane straight, while adjustable hinges and closer force allow compression to be maintained without excessive manual effort.

Ana Özellikler

Continuous jamb and head gaskets limit bypass paths around the closed leaf.

A concealed drop seal closes the floor gap without a permanent raised threshold.

Rigid closed-cell insulation helps maintain a straight sealing edge over the leaf height.

Adjustable hinges compensate for settlement and restore uniform gasket compression.

Flush vision panels and interlock magnets can be integrated without exposed cavities.

Müşteri Ürün Sorunları

Airtight swing doors must reduce leakage without becoming difficult to operate or introducing thresholds that obstruct carts and cleaning equipment.

Air escapes through the floor gap even when jamb seals are compressed.The automatic drop seal lowers across the full leaf width only after closing.
Excessive gasket compression makes the door hard to latch.Matched seal hardness, adjustable hinges and controlled closer force create repeatable contact.
A raised threshold disrupts trolley passage and floor cleaning.A retracting bottom seal works against the flat finished floor without a permanent sill.
Leaf warping creates isolated leakage points along one jamb.A rigid foam core and reinforced perimeter preserve a consistent sealing plane.

Tipik uygulamalar

Personnel airlocksSterile compounding suitesPressure-cascade laboratoriesIsolation support roomsHigh-containment change areas

Teknik parametreler

Representative construction values for a gasketed airtight cleanroom swing door are listed below.

Temel malzemelerClosed-cell rigid polyurethane foam
Panel kalınlığı50 mm door leaf
Effective Width (Etkili Genişlik)800-1200 mm single-leaf clear opening
Maksimum uzunluk2400 mm maximum leaf height
Çelik yüz yüze kalınlığı0.8-1.0 mm powder-coated galvanized steel skins
Core Density (Çekirdek Yoğunluğu)40-45 kg/m³ polyurethane
Termal İletkenlik0.022-0.028 W/(m·K) typical polyurethane core range
Yüzey bitirmeSmooth powder-coated steel with flush sealed trims
Ortak tipThree-sided EPDM compression gasket plus concealed automatic bottom drop seal
Customization (Özelleşme)Kullanılan amaçlanan uygulama ve çalışma ortamına göre kullanılabilir

Mevcut Seçenekler

Magnetic perimeter sealsInterlock-ready flush maglockHands-free automatic openerDouble-glazed observation window

Planning a Airtight Cleanroom Swing Door specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun
E-posta Bize whatsapp WeChat

Ana Sayfa

Ürünler

Haberler

Hakkımızda

İletişim