청정실 스윙 도어
- Four-Side Sealing Strategy
- Automatic Bottom Drop Seal
- Rigid Insulated Leaf
- Threshold-Free Passage
상품 소개
The Airtight Cleanroom Swing Door controls leakage through the doorway by combining accurate leaf-to-frame alignment with compressible seals along the head, jambs and threshold. The bottom seal retracts while the door moves and drops against the finished floor when closed. A stiff polyurethane-cored leaf keeps the gasket contact plane straight, while adjustable hinges and closer force allow compression to be maintained without excessive manual effort.
주요 기능
A concealed drop seal closes the floor gap without a permanent raised threshold.
Rigid closed-cell insulation helps maintain a straight sealing edge over the leaf height.
Adjustable hinges compensate for settlement and restore uniform gasket compression.
Flush vision panels and interlock magnets can be integrated without exposed cavities.
고객 제품 관심사
Airtight swing doors must reduce leakage without becoming difficult to operate or introducing thresholds that obstruct carts and cleaning equipment.
일반적인 응용 프로그램
기술 매개변수
Representative construction values for a gasketed airtight cleanroom swing door are listed below.
| 핵심 재료 | Closed-cell rigid polyurethane foam |
|---|---|
| 패널 두께 | 50 mm door leaf |
| 유효 폭 | 800-1200 mm single-leaf clear opening |
| 최대 길이 | 2400 mm maximum leaf height |
| 강철 면면 두께 | 0.8-1.0 mm powder-coated galvanized steel skins |
| 코어 밀도 | 40-45 kg/m³ polyurethane |
| 열전도도 (Thermal Conductivity) | 0.022-0.028 W/(m·K) typical polyurethane core range |
| 표면 마무리 | Smooth powder-coated steel with flush sealed trims |
| 접합 유형 | Three-sided EPDM compression gasket plus concealed automatic bottom drop seal |
| 사용자 정의 | 사용 대상 어플리케이션 및 운영 환경에 따라 사용 가능 |
사용 가능한 옵션
Planning a Airtight Cleanroom Swing Door specification?
치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

영어
독일어
아랍어
프랑스어
인도네시아어
일본어
한국어현재 Current
말레이어
포르투갈어
러시아어
스페인어
태국어
터키어
베트남어