Nhà cung cấp một cửa của bạn cho thiết bị phòng sạch và thiết bị vô trùng cơ sở thiết yếuHỗ trợ dự án quốc tế
Open mobile navigationClose mobile navigation
Cửa phòng sạch, cửa sổ và hệ thống khóa

Cửa Swing phòng sạch kín không khí

A pressure-control swing doorset with a rigid insulated leaf, continuous EPDM frame seals and a concealed automatic bottom seal that closes the threshold gap.
  • Four-Side Sealing Strategy
  • Automatic Bottom Drop Seal
  • Rigid Insulated Leaf
  • Threshold-Free Passage
Yêu cầu báo giá Duyệt các sản phẩm

Giới thiệu Sản phẩm

The Airtight Cleanroom Swing Door controls leakage through the doorway by combining accurate leaf-to-frame alignment with compressible seals along the head, jambs and threshold. The bottom seal retracts while the door moves and drops against the finished floor when closed. A stiff polyurethane-cored leaf keeps the gasket contact plane straight, while adjustable hinges and closer force allow compression to be maintained without excessive manual effort.

Các tính năng chính

Continuous jamb and head gaskets limit bypass paths around the closed leaf.

A concealed drop seal closes the floor gap without a permanent raised threshold.

Rigid closed-cell insulation helps maintain a straight sealing edge over the leaf height.

Adjustable hinges compensate for settlement and restore uniform gasket compression.

Flush vision panels and interlock magnets can be integrated without exposed cavities.

Các mối quan tâm về sản phẩm của khách hàng

Airtight swing doors must reduce leakage without becoming difficult to operate or introducing thresholds that obstruct carts and cleaning equipment.

Air escapes through the floor gap even when jamb seals are compressed.The automatic drop seal lowers across the full leaf width only after closing.
Excessive gasket compression makes the door hard to latch.Matched seal hardness, adjustable hinges and controlled closer force create repeatable contact.
A raised threshold disrupts trolley passage and floor cleaning.A retracting bottom seal works against the flat finished floor without a permanent sill.
Leaf warping creates isolated leakage points along one jamb.A rigid foam core and reinforced perimeter preserve a consistent sealing plane.

Các ứng dụng điển hình

Personnel airlocksSterile compounding suitesPressure-cascade laboratoriesIsolation support roomsHigh-containment change areas

Thông số kỹ thuật

Representative construction values for a gasketed airtight cleanroom swing door are listed below.

Vật liệu lõiClosed-cell rigid polyurethane foam
Độ dày bảng điều khiển50 mm door leaf
Chiều rộng hiệu quả800-1200 mm single-leaf clear opening
Chiều dài tối đa2400 mm maximum leaf height
Thép đối mặt với độ dày0.8-1.0 mm powder-coated galvanized steel skins
Mật độ lõi40-45 kg/m³ polyurethane
Độ dẫn nhiệt0.022-0.028 W/(m·K) typical polyurethane core range
Kết thúc bề mặtSmooth powder-coated steel with flush sealed trims
Loại khớp nốiThree-sided EPDM compression gasket plus concealed automatic bottom drop seal
Tùy chỉnhCó sẵn dựa trên ứng dụng dự định và môi trường hoạt động

Các tùy chọn có sẵn

Magnetic perimeter sealsInterlock-ready flush maglockHands-free automatic openerDouble-glazed observation window

Planning a Airtight Cleanroom Swing Door specification?

Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.

Nói chuyện với đội ngũ của chúng tôi
Email cho chúng tôi WhatsApp WeChat

Trang chủ

Sản phẩm

Tin tức

Về chúng tôi

Liên hệ