Complete airtight cleanroom swing door with sealed flush frame

クリーンルームのドア、窓およびインターロックシステム

A 気密クリーンルームのスイングドア

A pressure-control swing doorset with a rigid insulated leaf, continuous EPDM frame seals and a concealed automatic bottom seal that closes the threshold gap.

Four-Side Sealing Strategy
Automatic Bottom Drop Seal
Rigid Insulated Leaf
Threshold-Free Passage

見積もりリクエスト製品案内

商品紹介

The Airtight Cleanroom Swing Door controls leakage through the doorway by combining accurate leaf-to-frame alignment with compressible seals along the head, jambs and threshold. The bottom seal retracts while the door moves and drops against the finished floor when closed. A stiff polyurethane-cored leaf keeps the gasket contact plane straight, while adjustable hinges and closer force allow compression to be maintained without excessive manual effort.

主要な特徴

Continuous jamb and head gaskets limit bypass paths around the closed leaf.

A concealed drop seal closes the floor gap without a permanent raised threshold.

Rigid closed-cell insulation helps maintain a straight sealing edge over the leaf height.

Adjustable hinges compensate for settlement and restore uniform gasket compression.

Flush vision panels and interlock magnets can be integrated without exposed cavities.

お客様の製品に関する懸念事項

Airtight swing doors must reduce leakage without becoming difficult to operate or introducing thresholds that obstruct carts and cleaning equipment.

Air escapes through the floor gap even when jamb seals are compressed.The automatic drop seal lowers across the full leaf width only after closing.

Excessive gasket compression makes the door hard to latch.Matched seal hardness, adjustable hinges and controlled closer force create repeatable contact.

A raised threshold disrupts trolley passage and floor cleaning.A retracting bottom seal works against the flat finished floor without a permanent sill.

Leaf warping creates isolated leakage points along one jamb.A rigid foam core and reinforced perimeter preserve a consistent sealing plane.

典型的な用途

パーソナルエアロックSterile compounding suitesPressure-cascade laboratoriesIsolation support roomsHigh-containment change areas

技術的なパラメータ

Representative construction values for a gasketed airtight cleanroom swing door are listed below.

コア材料	Closed-cell rigid polyurethane foam
パネルの厚さ	50 mm door leaf
有効幅	800-1200 mm single-leaf clear opening
最大長さ	2400 mm maximum leaf height
鋼鉄の厚さを直面する	0.8-1.0 mm powder-coated galvanized steel skins
コア密度	40-45 kg/m³ polyurethane
熱伝導率	0.022-0.028 W/(m·K) typical polyurethane core range
表面仕上げ	Smooth powder-coated steel with flush sealed trims
ジョイントタイプ	Three-sided EPDM compression gasket plus concealed automatic bottom drop seal
カスタマイズ	目的のアプリケーションおよび動作環境に基づいて利用可能

利用可能なオプション

Magnetic perimeter sealsInterlock-ready flush maglockHands-free automatic openerDouble-glazed observation window

Planning a Airtight Cleanroom Swing Door specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する