Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Puertas de sala limpia, ventanas y sistemas de bloqueo
Airtight Cleanroom puerta swing
A pressure-control swing doorset with a rigid insulated leaf, continuous EPDM frame seals and a concealed automatic bottom seal that closes the threshold gap.
- Four-Side Sealing Strategy
- Automatic Bottom Drop Seal
- Rigid Insulated Leaf
- Threshold-Free Passage
Introducción del producto
The Airtight Cleanroom Swing Door controls leakage through the doorway by combining accurate leaf-to-frame alignment with compressible seals along the head, jambs and threshold. The bottom seal retracts while the door moves and drops against the finished floor when closed. A stiff polyurethane-cored leaf keeps the gasket contact plane straight, while adjustable hinges and closer force allow compression to be maintained without excessive manual effort.
Características clave
A concealed drop seal closes the floor gap without a permanent raised threshold.
Rigid closed-cell insulation helps maintain a straight sealing edge over the leaf height.
Adjustable hinges compensate for settlement and restore uniform gasket compression.
Flush vision panels and interlock magnets can be integrated without exposed cavities.
Preocupaciones del producto del cliente
Airtight swing doors must reduce leakage without becoming difficult to operate or introducing thresholds that obstruct carts and cleaning equipment.
Air escapes through the floor gap even when jamb seals are compressed.The automatic drop seal lowers across the full leaf width only after closing.
Excessive gasket compression makes the door hard to latch.Matched seal hardness, adjustable hinges and controlled closer force create repeatable contact.
A raised threshold disrupts trolley passage and floor cleaning.A retracting bottom seal works against the flat finished floor without a permanent sill.
Leaf warping creates isolated leakage points along one jamb.A rigid foam core and reinforced perimeter preserve a consistent sealing plane.
Aplicaciones típicas
Airlocks para personalSterile compounding suitesPressure-cascade laboratoriesIsolation support roomsHigh-containment change areas
Parámetros técnicos
Representative construction values for a gasketed airtight cleanroom swing door are listed below.
| Materiales Core | Closed-cell rigid polyurethane foam |
|---|---|
| Panel de espesor | 50 mm door leaf |
| Ancho efectivo | 800-1200 mm single-leaf clear opening |
| Longitud máxima | 2400 mm maximum leaf height |
| Acero frente a espesor | 0.8-1.0 mm powder-coated galvanized steel skins |
| Densidad Core | 40-45 kg/m³ polyurethane |
| Conductividad térmica | 0.022-0.028 W/(m·K) typical polyurethane core range |
| Superficie acabada | Smooth powder-coated steel with flush sealed trims |
| Tipo conjunto | Three-sided EPDM compression gasket plus concealed automatic bottom drop seal |
| Customization | Disponible según la aplicación prevista y el entorno operativo |
Opciones disponibles
Magnetic perimeter sealsInterlock-ready flush maglockHands-free automatic openerDouble-glazed observation window
Planning a Airtight Cleanroom Swing Door specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
