İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Ekipmanları Yedek Parçaları
AHU Replacement Filtre
A rigid-header six-pocket air filter for replacing an established particulate stage in cleanroom and process air-handling units without changing the filter housing.
- Six Tapered Filter Pockets
- Rigid Galvanized Header
- Extended Media Area
- Matched Gasket Options
Ürün tanıtımı
The AHU replacement filter is an extended-surface pocket filter installed in a front- or side-access filter bank. Six tapered glass-fiber bags increase usable media area behind a standard square header while internal seams keep the pockets separated as airflow develops. A folded galvanized-steel frame holds the pocket mouths square, and a continuous perimeter gasket can seal the header against the retaining frame. Replacement selection must reproduce the existing face dimensions, pocket depth, filter stage, airflow direction and gasket location so the new filter seats correctly without bypass or interference inside the air-handling unit.
Ana Özellikler
The folded galvanized-steel header resists handling distortion during removal, transport and clamping in the filter bank.
Separated pocket seams reduce crowding between adjacent bags and preserve open media area under operating airflow.
Optional flat perimeter gaskets support a continuous compression seal on the specified upstream or downstream header face.
Müşteri Ürün Sorunları
A pocket filter can fit the opening yet still perform poorly when its depth, pocket layout or sealing arrangement differs from the original module.
An incorrect face size or header depth prevents the replacement from seating beneath the existing clamps.Module width, height, header depth and retaining-frame clearance are matched to the removed filter before manufacture.
Bags that are too long can contact coils, dampers or the next filter stage inside a shallow AHU section.Pocket depth and installed airflow direction are selected to preserve the measured downstream service clearance.
A missing or misplaced gasket allows unfiltered air to bypass the media around the header.Gasket material, face location and continuity are configured for the actual sealing surface in the filter bank.
Poor pocket separation causes adjacent bags to crowd together and reduces effective media exposure.Tapered pocket geometry and continuous internal separators hold six flow paths open across the module.
Tipik uygulamalar
Cleanroom make-up and recirculation AHUsProcess ventilation filter banksHEPA prefiltration stagesCommercial and industrial HVAC maintenance
Teknik parametreler
The ranges below describe common rigid-header pocket filters used as replaceable AHU stages; final dimensions and media selection are matched to the installed filter bank.
| Temel malzemeler | Air-laid glass-fiber pocket media with galvanized-steel header and optional elastomer perimeter gasket |
|---|---|
| Panel kalınlığı | 20-25 mm nominal folded header depth |
| Effective Width (Etkili Genişlik) | 287-592 mm nominal filter module width |
| Maksimum uzunluk | Up to 640 mm pocket depth |
| Çelik yüz yüze kalınlığı | 0.5-0.8 mm nominal galvanized-steel header sheet |
| Core Density (Çekirdek Yoğunluğu) | 16-40 kg/m³ for representative low-density bonded glass-fiber media |
| Termal İletkenlik | 0.032-0.046 W/(m·K) for representative low-density glass-fiber media |
| Yüzey bitirme | Natural galvanized-silver header, clean white glass-fiber pockets and optional black flat gasket |
| Ortak tip | Sealed six-pocket assembly retained in a folded double-U header with compression-gasket seating |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Matched full-size or half-size module370-640 mm pocket depthAlternative pocket count and media gradeUpstream, downstream or circumferential gasket
Planning a AHU Replacement Filter specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
