Front-left three-quarter view of a six-pocket AHU replacement filter with galvanized header

クリーンルーム機器のスペアパーツ

AHU 交換フィルター

A rigid-header six-pocket air filter for replacing an established particulate stage in cleanroom and process air-handling units without changing the filter housing.

Six Tapered Filter Pockets
Rigid Galvanized Header
Extended Media Area
Matched Gasket Options

見積もりリクエスト製品案内

商品紹介

The AHU replacement filter is an extended-surface pocket filter installed in a front- or side-access filter bank. Six tapered glass-fiber bags increase usable media area behind a standard square header while internal seams keep the pockets separated as airflow develops. A folded galvanized-steel frame holds the pocket mouths square, and a continuous perimeter gasket can seal the header against the retaining frame. Replacement selection must reproduce the existing face dimensions, pocket depth, filter stage, airflow direction and gasket location so the new filter seats correctly without bypass or interference inside the air-handling unit.

主要な特徴

Six tapered pockets distribute airflow across an extended media area while retaining a compact standard header face.

The folded galvanized-steel header resists handling distortion during removal, transport and clamping in the filter bank.

Separated pocket seams reduce crowding between adjacent bags and preserve open media area under operating airflow.

Optional flat perimeter gaskets support a continuous compression seal on the specified upstream or downstream header face.

お客様の製品に関する懸念事項

A pocket filter can fit the opening yet still perform poorly when its depth, pocket layout or sealing arrangement differs from the original module.

An incorrect face size or header depth prevents the replacement from seating beneath the existing clamps.Module width, height, header depth and retaining-frame clearance are matched to the removed filter before manufacture.

Bags that are too long can contact coils, dampers or the next filter stage inside a shallow AHU section.Pocket depth and installed airflow direction are selected to preserve the measured downstream service clearance.

A missing or misplaced gasket allows unfiltered air to bypass the media around the header.Gasket material, face location and continuity are configured for the actual sealing surface in the filter bank.

Poor pocket separation causes adjacent bags to crowd together and reduces effective media exposure.Tapered pocket geometry and continuous internal separators hold six flow paths open across the module.

典型的な用途

Cleanroom make-up and recirculation AHUsProcess ventilation filter banksHEPA prefiltration stagesCommercial and industrial HVAC maintenance

技術的なパラメータ

The ranges below describe common rigid-header pocket filters used as replaceable AHU stages; final dimensions and media selection are matched to the installed filter bank.

コア材料	Air-laid glass-fiber pocket media with galvanized-steel header and optional elastomer perimeter gasket
パネルの厚さ	20-25 mm nominal folded header depth
有効幅	287-592 mm nominal filter module width
最大長さ	Up to 640 mm pocket depth
鋼鉄の厚さを直面する	0.5-0.8 mm nominal galvanized-steel header sheet
コア密度	16-40 kg/m³ for representative low-density bonded glass-fiber media
熱伝導率	0.032-0.046 W/(m·K) for representative low-density glass-fiber media
表面仕上げ	Natural galvanized-silver header, clean white glass-fiber pockets and optional black flat gasket
ジョイントタイプ	Sealed six-pocket assembly retained in a folded double-U header with compression-gasket seating
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Matched full-size or half-size module370-640 mm pocket depthAlternative pocket count and media gradeUpstream, downstream or circumferential gasket

Planning a AHU Replacement Filter specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する