Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de sala limpia específicos de la industria
Carro de transferencia
A cleanable stainless steel cart that supports wafer boxes on retained, airflow-friendly shelves during low-vibration movement through controlled areas.
- Secure Wafer-Box Retention
- Low-Shedding Stainless Frame
- Airflow-Friendly Shelves
- Smooth Locking Casters
Introducción del producto
The wafer transfer cart uses rounded stainless tubing, perforated or angled shelves and position-retaining rails to protect wafer boxes during manual movement. Smooth exposed surfaces reduce particle traps and simplify wiping, while large polyurethane casters absorb small floor irregularities that could disturb fragile wafer loads. Shelf spacing and retaining geometry can be matched to common 150 mm, 200 mm or 300 mm lot-box formats.
Características clave
Perforated shelves preserve vertical cleanroom airflow and reduce horizontal particle-collection surfaces.
Rounded stainless frame members minimize corners and exposed crevices during cleaning.
Large locking polyurethane casters provide smooth rolling and secure parking at transfer stations.
Preocupaciones del producto del cliente
Manual wafer transport must limit vibration, prevent box movement and remain easy to clean without obstructing cleanroom airflow.
Wafer boxes can slide on a flat trolley during turning or braking.Angled shelves, dividers and retaining rails constrain each carrier position.
Small hard casters transmit floor joints directly to fragile wafer loads.Larger polyurethane wheels improve rolling smoothness and reduce shock transmission.
Box-section frames and solid shelves create difficult-to-clean particle traps.Rounded tubing and perforated shelf surfaces reduce ledges and hidden corners.
An unlocked cart can move while operators transfer a wafer box.Positive caster brakes secure the cart at loading and process-interface points.
Aplicaciones típicas
Wafer lot transport between process areasMetrology and inspection stagingSemiconductor cleanroom material movementControlled transfer of closed wafer boxes
Parámetros técnicos
Typical construction values for a stainless cleanroom wafer transfer cart are shown below.
| Materiales Core | 304 or 316L stainless steel tubular frame with stainless perforated shelves |
|---|---|
| Panel de espesor | 1.0-1.5 mm shelf sheet thickness |
| Ancho efectivo | 750-1450 mm cart width |
| Longitud máxima | Up to 1600 mm cart length |
| Acero frente a espesor | 1.0-1.5 mm stainless steel shelves and retaining panels |
| Densidad Core | 7850-8000 kg/m³ for stainless steel components |
| Conductividad térmica | 14-17 W/(m·K) for stainless steel structure |
| Superficie acabada | Brushed or electropolished stainless steel with smooth deburred edges |
| Tipo conjunto | Continuous welded tubular frame with removable shelf dividers and locking caster plates |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
150 mm, 200 mm or 300 mm box layoutAngled or level perforated shelves304 or 316L stainless steelCustom shelf and retaining-rail arrangement
Planning a Wafer Transfer Cart specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
