Wafer transfer cart in complete three-quarter view with retained wafer box

Peralatan Cleanroom Spesifik Industri

Gerobak Transfer Wafer

A cleanable stainless steel cart that supports wafer boxes on retained, airflow-friendly shelves during low-vibration movement through controlled areas.

Secure Wafer-Box Retention
Low-Shedding Stainless Frame
Airflow-Friendly Shelves
Smooth Locking Casters

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The wafer transfer cart uses rounded stainless tubing, perforated or angled shelves and position-retaining rails to protect wafer boxes during manual movement. Smooth exposed surfaces reduce particle traps and simplify wiping, while large polyurethane casters absorb small floor irregularities that could disturb fragile wafer loads. Shelf spacing and retaining geometry can be matched to common 150 mm, 200 mm or 300 mm lot-box formats.

Fitur utama:

Retaining rails and adjustable dividers keep wafer boxes from shifting during travel.

Perforated shelves preserve vertical cleanroom airflow and reduce horizontal particle-collection surfaces.

Rounded stainless frame members minimize corners and exposed crevices during cleaning.

Large locking polyurethane casters provide smooth rolling and secure parking at transfer stations.

Kekhawatiran produk pelanggan

Manual wafer transport must limit vibration, prevent box movement and remain easy to clean without obstructing cleanroom airflow.

Wafer boxes can slide on a flat trolley during turning or braking.Angled shelves, dividers and retaining rails constrain each carrier position.

Small hard casters transmit floor joints directly to fragile wafer loads.Larger polyurethane wheels improve rolling smoothness and reduce shock transmission.

Box-section frames and solid shelves create difficult-to-clean particle traps.Rounded tubing and perforated shelf surfaces reduce ledges and hidden corners.

An unlocked cart can move while operators transfer a wafer box.Positive caster brakes secure the cart at loading and process-interface points.

Aplikasi yang Tipis

Wafer lot transport between process areasMetrology and inspection stagingSemiconductor cleanroom material movementControlled transfer of closed wafer boxes

Parameter teknis

Typical construction values for a stainless cleanroom wafer transfer cart are shown below.

Bahan inti	304 or 316L stainless steel tubular frame with stainless perforated shelves
Ketebalan Panel (Panel Thickness)	1.0-1.5 mm shelf sheet thickness
Efektif lebar	750-1450 mm cart width
Panjang maksimum	Up to 1600 mm cart length
Baja menghadap ketebalan	1.0-1.5 mm stainless steel shelves and retaining panels
Kepadatan inti (core density)	7850-8000 kg/m³ for stainless steel components
Konduktivitas Termal (Thermal Conductivity)	14-17 W/(m·K) for stainless steel structure
Permukaan selesai	Brushed or electropolished stainless steel with smooth deburred edges
Jenis Bersama	Continuous welded tubular frame with removable shelf dividers and locking caster plates
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

150 mm, 200 mm or 300 mm box layoutAngled or level perforated shelves304 atau 316L stainless steelCustom shelf and retaining-rail arrangement

Planning a Wafer Transfer Cart specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami