Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Sistemas de pisos de sala limpia
Base de Epoxy Cove
A vertical-grade, aggregate-filled epoxy mortar shaped into an integral radius between resin flooring and adjacent walls, curbs or equipment bases.
- Integral Resin Transition
- Sag-Resistant Cove Mortar
- 25 mm Formed Radius
- Abrasion-Resistant Finish
Introducción del producto
The seamless epoxy cove base extends a resin floor upward with a hand-trowelled mortar composed of epoxy binder and graded aggregate. Its vertical-grade consistency holds the required height and radius without slumping while it cures. A keyed chase or non-corroding cap strip defines the upper termination, and the finished cove can receive a compatible resin seal coat to match the floor. The same material can be formed around equipment pads, kerbs and columns where a square internal corner would obstruct cleaning.
Características clave
A formed radius links floor and wall surfaces without inserting a separate flexible skirting component.
Fine graded aggregate builds impact and abrasion resistance at the exposed wall base.
Compatible resin seal coats coordinate colour and chemical exposure with the adjoining flooring system.
Preocupaciones del producto del cliente
An integral resin cove must hold its shape vertically, close the floor perimeter and remain compatible with the adjoining wearing system.
Standard flowing epoxy runs down the wall before a cove radius can cure.A vertical-grade mortar uses a thixotropic binder and aggregate blend that stays where it is trowelled.
A separate skirting strip creates upper and lower edges beside a monolithic resin floor.The epoxy mortar bonds directly to the prepared horizontal and vertical substrates as an integral cove.
Impacts from cleaning equipment chip a thin painted fillet at the wall base.A 3–6 mm aggregate-filled body provides a more substantial protected transition.
Uneven hand work produces inconsistent height and radius around the room.A level termination guide and sized cove trowel control the upper line and curved geometry.
Aplicaciones típicas
Pharmaceutical resin-floor perimetersCleanroom equipment plinthsLaboratory wall basesHygienic kerbs and column basesWash-down production rooms
Parámetros técnicos
Typical construction data for a trowel-applied vertical epoxy cove mortar are listed below.
| Materiales Core | Three-component solvent-free epoxy binder with specially graded mineral aggregate |
|---|---|
| Panel de espesor | 3.0–6.0 mm nominal trowelled cove thickness |
| Ancho efectivo | 100 mm typical vertical cove height with a 25 mm internal radius |
| Longitud máxima | Approximately 5800 mm nominal cove run per full kit at 100 mm height and 4 mm thickness |
| Acero frente a espesor | 0 mm; the cove is an aggregate-filled epoxy mortar without steel facing |
| Densidad Core | Approximately 1810 kg/m³ for the combined epoxy cove mortar components |
| Conductividad térmica | Approximately 0.25–0.40 W/(m·K) for cured aggregate-filled epoxy mortar |
| Superficie acabada | Fine trowelled texture with a compatible pigmented epoxy or polyurethane seal coat |
| Tipo conjunto | Integral bonded floor-to-wall radius terminated in a keyed chase or non-corroding cap strip |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
75–150 mm cove height25 or 38 mm internal radiusKeyed chase or metal cap-strip terminationColour-matched epoxy or polyurethane seal coat
Planning a Seamless Epoxy Cove Base specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
