Complete grey seamless epoxy cove base sample with formed radius and metal cap strip

クリーンルームフロアシステム

シームレスエポキシコーブベース

A vertical-grade, aggregate-filled epoxy mortar shaped into an integral radius between resin flooring and adjacent walls, curbs or equipment bases.

Integral Resin Transition
Sag-Resistant Cove Mortar
25 mm Formed Radius
Abrasion-Resistant Finish

見積もりリクエスト製品案内

商品紹介

The seamless epoxy cove base extends a resin floor upward with a hand-trowelled mortar composed of epoxy binder and graded aggregate. Its vertical-grade consistency holds the required height and radius without slumping while it cures. A keyed chase or non-corroding cap strip defines the upper termination, and the finished cove can receive a compatible resin seal coat to match the floor. The same material can be formed around equipment pads, kerbs and columns where a square internal corner would obstruct cleaning.

主要な特徴

The thixotropic epoxy mortar remains stable on vertical surfaces during shaping and cure.

A formed radius links floor and wall surfaces without inserting a separate flexible skirting component.

Fine graded aggregate builds impact and abrasion resistance at the exposed wall base.

Compatible resin seal coats coordinate colour and chemical exposure with the adjoining flooring system.

お客様の製品に関する懸念事項

An integral resin cove must hold its shape vertically, close the floor perimeter and remain compatible with the adjoining wearing system.

Standard flowing epoxy runs down the wall before a cove radius can cure.A vertical-grade mortar uses a thixotropic binder and aggregate blend that stays where it is trowelled.

A separate skirting strip creates upper and lower edges beside a monolithic resin floor.The epoxy mortar bonds directly to the prepared horizontal and vertical substrates as an integral cove.

Impacts from cleaning equipment chip a thin painted fillet at the wall base.A 3–6 mm aggregate-filled body provides a more substantial protected transition.

Uneven hand work produces inconsistent height and radius around the room.A level termination guide and sized cove trowel control the upper line and curved geometry.

典型的な用途

Pharmaceutical resin-floor perimetersCleanroom equipment plinthsLaboratory wall basesHygienic kerbs and column basesWash-down production rooms

技術的なパラメータ

Typical construction data for a trowel-applied vertical epoxy cove mortar are listed below.

コア材料	Three-component solvent-free epoxy binder with specially graded mineral aggregate
パネルの厚さ	3.0–6.0 mm nominal trowelled cove thickness
有効幅	100 mm typical vertical cove height with a 25 mm internal radius
最大長さ	Approximately 5800 mm nominal cove run per full kit at 100 mm height and 4 mm thickness
鋼鉄の厚さを直面する	0 mm; the cove is an aggregate-filled epoxy mortar without steel facing
コア密度	Approximately 1810 kg/m³ for the combined epoxy cove mortar components
熱伝導率	Approximately 0.25–0.40 W/(m·K) for cured aggregate-filled epoxy mortar
表面仕上げ	Fine trowelled texture with a compatible pigmented epoxy or polyurethane seal coat
ジョイントタイプ	Integral bonded floor-to-wall radius terminated in a keyed chase or non-corroding cap strip
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

75–150 mm cove height25 or 38 mm internal radiusKeyed chase or metal cap-strip terminationColour-matched epoxy or polyurethane seal coat

Planning a Seamless Epoxy Cove Base specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する