Complete grey seamless epoxy cove base sample with formed radius and metal cap strip

클린룸 바닥 시스템

이음매 없는 에포시 코브 베이스

A vertical-grade, aggregate-filled epoxy mortar shaped into an integral radius between resin flooring and adjacent walls, curbs or equipment bases.

Integral Resin Transition
Sag-Resistant Cove Mortar
25 mm Formed Radius
Abrasion-Resistant Finish

견적 요청 제품 찾아보기

상품 소개

The seamless epoxy cove base extends a resin floor upward with a hand-trowelled mortar composed of epoxy binder and graded aggregate. Its vertical-grade consistency holds the required height and radius without slumping while it cures. A keyed chase or non-corroding cap strip defines the upper termination, and the finished cove can receive a compatible resin seal coat to match the floor. The same material can be formed around equipment pads, kerbs and columns where a square internal corner would obstruct cleaning.

주요 기능

The thixotropic epoxy mortar remains stable on vertical surfaces during shaping and cure.

A formed radius links floor and wall surfaces without inserting a separate flexible skirting component.

Fine graded aggregate builds impact and abrasion resistance at the exposed wall base.

Compatible resin seal coats coordinate colour and chemical exposure with the adjoining flooring system.

고객 제품 관심사

An integral resin cove must hold its shape vertically, close the floor perimeter and remain compatible with the adjoining wearing system.

Standard flowing epoxy runs down the wall before a cove radius can cure.A vertical-grade mortar uses a thixotropic binder and aggregate blend that stays where it is trowelled.

A separate skirting strip creates upper and lower edges beside a monolithic resin floor.The epoxy mortar bonds directly to the prepared horizontal and vertical substrates as an integral cove.

Impacts from cleaning equipment chip a thin painted fillet at the wall base.A 3–6 mm aggregate-filled body provides a more substantial protected transition.

Uneven hand work produces inconsistent height and radius around the room.A level termination guide and sized cove trowel control the upper line and curved geometry.

일반적인 응용 프로그램

Pharmaceutical resin-floor perimetersCleanroom equipment plinthsLaboratory wall basesHygienic kerbs and column basesWash-down production rooms

기술 매개변수

Typical construction data for a trowel-applied vertical epoxy cove mortar are listed below.

핵심 재료	Three-component solvent-free epoxy binder with specially graded mineral aggregate
패널 두께	3.0–6.0 mm nominal trowelled cove thickness
유효 폭	100 mm typical vertical cove height with a 25 mm internal radius
최대 길이	Approximately 5800 mm nominal cove run per full kit at 100 mm height and 4 mm thickness
강철 면면 두께	0 mm; the cove is an aggregate-filled epoxy mortar without steel facing
코어 밀도	Approximately 1810 kg/m³ for the combined epoxy cove mortar components
열전도도 (Thermal Conductivity)	Approximately 0.25–0.40 W/(m·K) for cured aggregate-filled epoxy mortar
표면 마무리	Fine trowelled texture with a compatible pigmented epoxy or polyurethane seal coat
접합 유형	Integral bonded floor-to-wall radius terminated in a keyed chase or non-corroding cap strip
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

75–150 mm cove height25 or 38 mm internal radiusKeyed chase or metal cap-strip terminationColour-matched epoxy or polyurethane seal coat

Planning a Seamless Epoxy Cove Base specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.